MPLS

Hello Team,I am ran in to wierd problem here , below is my simple topologie. R1 (Lo0 - 192.168.254.204)<=> R2 (Lo0-192.168.254.27)<GRE> R3 <=> R4 <=> R5 <=> R6 <=> R7 (Lo0-192.168.254.160) We are running is-is as igp & mpls is enbled on routes. Goal ...

In GNS 3 lab i am tring to transport routes from R32 to R20. (both routers are PE in the MPLS)   In R32 I have a eBGP adjacency with R1 and learning many routes. In router R32 the rutes adverticed from R1 is inserted in VRF INTERNET:   ip vrf INTERNE...

Hi, Plz help to configure the Qos (3 classes Real time, Critical & Best effort,  based on COS client marking or DSCP) for the below scenario, THE PE's are C7606S : WS-X6748-GE-TX  ==> Clients facing module Sip 400 ==> Core facing Module sh module ...

Hi,  It seems the following commands are mutually exclusive under a vrf definition ipv4 AF: import ipv4 unicast [limit] map [map-name] and import map [map-name] I have the need to filter (both) prefixes that we import from the global table and pre...

Can anybody explain me why the ASR is ignoring the soo community in my route-map export-400 config? vrf definition 400 rd 172.16.224.7:400 ! address-family ipv4 import map import-400 export map export-400 exit-address-family ip extcommunity-list sta...

HiWhy doesn't  next-hop work with RPL. Configured under router bgp address-family it works fine.When I follow the label path from a client, it goes wrong between the central routers, label pointing to wrong destination/net!! Doesn´t workrouter bgp 12...

Hi Guys in the CRS-16 how bigg is the throughout ? is it 92TB what is switcing fabric , is it the same as cross bar is midd plane is it exist between the switchfabric and the cross bar what is PLIM in CRS chassis  pls clarify thanks all

Hi Guys 1) do we still need MPLS TE in the modern SP network ( as GIG Link is every where ) or JUST enough relying on IGP < since nowsday 3 packets loss in case in covergence doesnt heart 2) wich one is more apropriate FRR Link protection or Node pro...

Hi GuysI entered the below commands on IOS XR lets say I SSH to this box and the session didnt work i need to clear this config before the 2 mts overwhat IOS XR Command shall i use to clear the above before lock my self out RP/0/RSP0/CPU0:PE2(config...

Hi, could someone plz clarify difference between BGP add-path and BGP multi-path concept ?

Hi Guys on CRS-16/S-B , CRS-16-PRP-12G , transceiver "DWDM-XFP-C" ,will be connect directly to line card at MSTP15454-M6 with  ""DWDM-XFP-C" any cisco Docs underlying  such deployment  thanks 

Hi Everyone, I have been trying to simulate H-VPLS in Cisco IOS XR devices on GNS3. I used the following configuration to set up an access PW in a bridge domain in a N-PE device: l2vpn bridge group test  bridge-domain mc   neighbor 10.0.0.1 pw-id 200...