Network Management

Hi there,within our network we don't use the autodiscovery mechanism and add devices manually.We discovered that after running a while new (manually) added devices aren't added/sync'd between DCR and RME (after CM DataCollection.Doing a manual RME-De...

HiWant to configure ,whenever their will be any changes in configuration of the devices get notification on the server as well as on email.How can be configure the same and need detailed description of the same.Plse let me know the solutionRegardsVai...

Hi Teamwe are not able to restore backup.plse find the logs and provide the solution.RegardsVaibhav

We are having a heck of a time trying to get consistent results on catos boxes whether its 4006's or 6500's running catos . You run a netconfig job and a lot of the 4006's seem to go ok but still get a fair amount of failures say 13 out of 50 sa...

Hi, From 1 of the switch Model 2960-24-TCLi get a following error,*** Device Details for 10.28.72.2 ***Protocol ==> TFTPSelected Protocols with order ==> Telnet,TFTP,SSH,RCP,HTTPSExecution Result:RUNNINGTELNET: Failed to establish TELNET connection t...

HelloI have questions regarding the use of SNMP in routers. For example, I have a router and get an FXO card, and would monitor the statistical data of this new interface. How would it be? I have to add the MIB of the same? or is already included in ...

How do we add users in CiscoWorks LMS? We installed LMS and the only way to login is using the admin account, but I know there's a way to create user accounts, I just can't find it.

All, I have two srv2024's connected via fiber using the gbhl1 adapters. 1-5 times per week, my users on this LAN lose connectivity to the servers that are behind a srw2024. I have switched the switch..so I doubt it is hw related.I enabled debug log...

Do you know if it is possible to clear all the discovered discrepancies and start from scratch? It seems to retain obsolete information.

Hi,we had installed a LMS 2.6 and we have migrated to a LMS 3.1 following the LMS Data Migration guide.Now LMS 3.1 doesn't start and in the TomcatMonitor.log. The error message in all the log files is similar to the following lines:java.io.FileNotFou...

I'm using CiscoView 6.1.7 on LMS 3.0.1.When I try to use CiscoView on a 7604 I receive a router partial layout with four level, first with a yellow text "Unsupported Card", second with a WS-X6724-SFP and the correct layout, the third e fourth card ar...