Hi,We have a customer with several Catalyst 3750s running IOS 12.2. They would like to enable MAC Notification Traps. Once enabled, we can see the MAC Notification traps being sent to our snmp host. The packet for the trap contains the MAC addres...
Hi,We have a customer with several Catalyst 3750s running IOS 12.2. They would like to enable MAC Notification Traps. Once enabled, we can see the MAC Notification traps being sent to our snmp host. The packet for the trap contains the MAC addres...
I'm trying to forward based on IP-precedence bitspc--->switch--->c1700----->c3640---->3750The 1700 successfully classifies packets with "ip-precedence critical" (5).Next step is for Cisco 3640 to prioritize forwarding...how can I do this with a 3640...
Hi,I would like to config the router with this command. the setting is that it supports 10 call per second. how to set it?rdgs
Hello, I have large network with many high priority customers, in CiscoWorks DFM I configure notification in compliance with our policy. But we also need notification about down customers and uplink interfaces. Can you help me configure this notifica...
some isp limit only one computers can use pppoe dailup by it's mac address,but ppp line do not need arp protocol and mac to transfer data,so,how can they do that? how to find the customers mac address through ppp line?thx very much
Detailerror----------Export Subscriber to "test.csv" failed(Cannot find the operation exportToFile in com.pcube.management.smm.suu.SSUMBean)----------* Can't import CSV to subscriber* Can't view report on subscriber/anonymousSCE Version 3.1.5 Build 2...
Hi to all,i need to backup all the files inside the flash of the router and i want know if exist some tool or something that perform this task automatically.Thanks and best regards,Carlo S.
Two of our routers (2821 both of them) report that a fan is not rotating, but I cannot seem to find any information regarding the replacement of the fan.Does anyone know if they can be replaced one by one, or if we would have to replace the board or ...
Is it possible to deployment multiple CLI Statements to a device. I am planning to deploy the following to all of our Cisco devices on the network via Netconfig. service tcp-keepalives-inservice tcp-keepalives-outno ip bootp serverno service padno la...
I have a Windows 2000 Server with LMS 2.6, Campus Manager 4.0.9. One of my users reports that he cannot export the topology view to Visio. I have polled my other users and they can export the Visio file; as well as I can download in either format, ...
I ordered a new server with 8GB of ram but wanted to know what the recommended switches are for the boot.ini. I'm trying to decide if I should use /PAE and/or /3GB. It looks like in order for the application to take advantage of the /3GB switch, it m...
Hi,I have a Cisco Works LMS 2.6 installed on an IBM server with 2 Intel XEON 3,20Ghz and 3Gb RAM.Now I am going to upgrade it to LMS 3.x with support for 1.5k devices.On data sheet this product is associated with a server with 2 Intel XEON 3,66Ghz an...
Joe, looking at the syslog, I find that there is no archive information. I can only go back and look at the past 24 hours. All devices are pointing to the CW server as a syslog server and it has worked in the past.I changed the purge settings a while...
We have ciscoworks LMS 2.6 working under ACS mode. It works fine. But sometimes when a L3 device add a new ip interface,even the device's old IP have been added in ACS, this device will appear in not configured in ACS report. Ask ACS admin add it in ...
Hi,I have configured LMS 2.5 to monitor the WAN Network. I have just added the devices into DCR and trying to monitor the Interface Status (Serial Links) which goes DOWN and UP. I have configured the below SNMP Parameters in the Cisco 3825 Router - s...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
10-08-2024 06:18 AM | ||
10-07-2024 06:32 AM | ||
10-03-2024 12:07 PM | ||
09-19-2024 08:55 AM | ||
09-18-2024 05:45 AM |
User | Count |
---|---|
3 | |
3 | |
2 | |
2 | |
2 |