Network Management

Good day, I'm shaping the NTP on my equipment catalyst 2950, 2960,3500 and 4500 but the problem is that I introduced that achievement configure the date but not the time, not if it is the software that is used or equipment. If anyone knows an NTP Sof...

Hello,after installing SDM 2.4.1 to our Cisco 1712 (IOS 12.3(11)T8, 96 MB RAM, 32 MB Flash), I get a message that "IPS is not supported, because the router has less than 128 MB RAM".However IPS is working fine (attack-drop.sdf) and also has been acce...

I'm getting the following error when try to push the image "c2800nm-entbasek9-mz.124-8d.bin" to my 2851 router. It meets the minmum requirement but I still get the following error. Should I ignore the error and continue or ??Please advise.Thanks.Warn...

How can I configure my CiscoWorks 2000 syslog server to use DNS or the device name for the log entries? My old CW syslog server does it, but the new one doesn't. the server resoves the names/ and reverse works from the command prompt and the fully ...

Due to a little script running to remove .tmp files these files have been removed from the system. We are running a Windows 2000 server. I am looking to recreate this file or run a database clean then reimport via CSV. Can anyone offer any help wi...

Is it possible to show PoE information, i.e. power consumed by devices plugged in a switch ? In CiscoView 6.1.6 or any LMS 3.0 software ? This information is visible on http management interface of the device.Moreover when right clicking on a 3750-Po...

Hi all,I wish to monitor an https url on port 8080 with IP SLA with IPM on LMS 2.6. When i say monitor i think about checking availability of a particular url https://url:8080 and have an alert action if the url don't respond.Is it possible to do a s...

Hello,trying to delete a device by using /usr/bin/env DCRCLIFILE=./.passwd /opt/CSCOpx/bin/dcrcli -u admin cmd=del id=xxxThis error occurs:<dcrcli> * Password file found using DCRCLIFILE environment variable.Error in Delete Device: Device is still m...

HiAnyone know what type of cable is needed to connect an Avocent CPS1610 to a Cisco console port?Avocent say its a "reversing cable" (1-8, 2-7, etc) but I've tried and it doesn't work.Geoff

I discovery 1110 devices for DANA worldwide. Now I need to reduce it to DANA Europe with 170 devices. I delete all other in CS in CM and in IPM but they are still coming up in DFM events and alerts. How can I clean up DFM ?

I am getting the following message when trying to use CW Assistant. CDP Neighbors (Could not fetch CDP Neighbor for the selected device.) CWA27: CiscoWorks Assistant does not support the installed Campus Manager version. Loading... D...

Hi experts,I've got the following error message:--------The supported protocols for image transfer are: TFTPImporting the image c3845-advsecurityk9-mz.124-17.bin from the device flash:1 into the Software Repository.Image will be copied to rep_sw_2287...

I have a 3825 that is now config'd and deployed. I'd like to make it the baseline for the next batch to be installed.I have archived (public) its' config in RME, but wonder:Since the config is, to some degree, machine specific (IE, image, IP address...

I have installed Cisco Works on a PC.Added Cisco Routers of different Series and associated them with their Loopback IP's.Now i am able to see Cisco View/Patch Panel View(which shows all the slots,cards & Interfaces of the router) of all my Routers.I...

Running LMS2.6Hi All,whenever I attempt to view a 2811 router in ciscoview I get an error saying: MessageCan't find applicable device package for 172.22.x.xI've seen this issue before with the 2800 series devices. Does anyone know of a software upda...