I have to get all the serial numbers of my IP phones linked to IP phone type and IP phone location.Does a report (end host or other)exist to answer this need ?If another solution exists, I take too.Thanks
Can a Cisco 851 handle being an edge router for a 3005 concentrator with say 20 remote users accessing a concentrator or for 5 VPN connections to a concentrator?All the router would be acting as a pass-through, filtering with an Infrastructure access...
I have LMS 2.6 working fine in my environment apart from inventory what kind of reports i can generate from lms for management , can we get the trafic flow report on LAN/WAN from LMS .Thanks
Our CSS (running version 07.50.1.05s) is configured with the following statements:logging host xxx.xxx.xxx.xxx facility 7 log-level debug-7andsnmp trap-host xxx.xxx.xxx.xxx <RW comm>and I have captured at the CiscoWorks server and have verified that ...
dear all,i was using ciscoworks 2000 together with whats up gold premium edition.1.can ciscoworks LMS integrate with whatsupgold?no clue from www.whatsupgold.com and cisco site.2.if i'm using ciscoworks lms with 300 device license, what will happen i...
I know there is a procedure for RME 3.x, I was wondering if you can do the same thing for RME 4.0.5http://www.cisco.com/en/US/products/sw/cscowork/ps2073/products_configuration_example09186a0080107dcb.shtml
I have 1400+ devices in LMS, however some of them are listed as "unreachable" - what should I be looking for in terms of making them reachable. I can ping them so they are on the network, its just that LMS says they are unreachable???
Hi,I'm upgrading from LMS 2.2 to 2.5, reusing the current server for some of the applications and setting up a standalone new one for Campus Manager with solaris 9. Despite I just purchased an upgrade license, the CDs include not just the upgrade but...
Hi,I am running LMS 2.6 and whenever I start Device Discovery in Campus Manager the job immediately fails.The Device Discovery log file shows the following:Debug enabled for package com.cisco.nm.ani.server.devdiscoveryTrace enabled for package com.ci...
HAs anyone been able to successfully deploy this? I have IPM working fine, I just want to be able to send traps from our source device to our syslog server so we get threshold and Timeout notification. I have TAC case opened so far no success. this i...
We have 3 RME servers at one location and 3 syslog servers located in 3 other states. These syslog servers are running the standard Solaris 2.9 syslogd. These servers also have the RSAC software installed where each communicate with it's respective...
HI! i need help fast!!! how can i connect to a 2520 router console and with what program and settings! i have the cable, but nothing is showing up under hyper terminal!! thx!
I have LMS2.5, with 1000+ devices.I am experiencing problems launching the Topoloy Manager in campus services. When it tries to connect to ANI server, it exits giving the following message:Cannot connect to ANIserverANIserver5.0.3Unknown errorVerify ...
I currently have a CiscoWorks server with two network connections. Lets say Gig 1 is 10.1.1.1 and Gig 2 is172.16.1.1. I need to be able to remotely access the server from a client on the 172.16.1.0 network only because these two networks (10.1.1.0...
