Network Security

Hi.We have an 1120 that just blinks green in the status LED.So I've connected to the CLI via USB and can see it stops at "Creating FXOS swap file..." when booting from itself. But also if I try to boot with a new image on a USB.When I try to factory ...

Hi Fellas,I have a question, regarding how the ASA with IPS module or Firepower with intrusion policy is able to check VPN traffic.The traffic is coming from a L2L tunnel and does a U turn pointing to a VTI so the traffic never pass through the devic...

Hello,we've a Cisco Firepower 2110 Threat Defense and we're going to move to M365.There's a large set of applications which I can setup in the firewall rules.Is there a best practise guide to setup our Firepower for the inbound and outbound rules? Ou...

good day, in-between TAC support renewal so can't open a case on this , so figured i'd ask of The Communityare there any add'l steps for Azure Gateway-side for traffic-flow thru FTD-based s2s ikev2 tunnel ?got the Tunnel 'up' but no traffic .... have...

This might be a dumb question but how would you set up the ASA firewall 1000 without internet connection? I have a switch that connects to it. I think I can console into it with putty but isnt there a gui ?

I have an ASA that I keep getting this error in the ASDM Syslog messages which I need to fix to troubleshoot a device. Severity 3 Syslog ID 313001  Denied ICMP type=8, code=0 from 10.21.1.100 on interface Work_interfaces I am a rule that permits ICMP...

I had recently a problem with AzureAD integration with Cisco FMC 7.4.2 and it was getting integrated and was able to partially downloaded and it was giving SQL related error. to get this resolved some highly contained object groups i did excluded wit...

We have a Cisco Firepower 1120 (ver 7.2) managed by FMC (ver 7.2.5). Our ISP is currently delivering 500 MB of DIA to us over Ethernet 1/1, which we have designated "Outside".We are upgrading to 2 GB of bandwidth and since the 1120 only has 1 gig por...

Hello, I’m not at all familiar with any of the intricacies in any way and really am just requesting a simple version answer for this please. I just want to know which asa image file I need to use and what adsm image to use in order for the firepower ...

I have a asa5500x-ssd120 SSD from an ASA5500-X that is opal locked. It is a micron drive. I saw some commands to revert revert or remove the psid for the 3100 Series if I'm not mistaken but those commands are only for that series. There are some raid...

Dear Community,I have a pair of FPR 3105 devices which have been reimages to ASA & running as ASAs with traditional ACL services.I don't have applied the Basic STD licensee; it has expired now post 60days of trail period. I am getting the throughput ...