Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, September 23, 2024 through Friday, October 4, 2024. Our colleagues Arpita Dash, Prateek Upadhyay and Udhay R. will be waiting to...
Recently i have competed IOS upgradation of cat 9300 switch after upgradation i got error like package is missing.when i checked more package.conf file all files are present in file nothing is missing still getting error.Also when i checked sh boot s...
hi, can anyone please help advise how to find out the maintenance contract based on the switch serial number? I used the following tool to check warranty status, but can't find the contract number and the details of the warranty, thanks in advance.De...
Hi Experts,Today when I am learning our company's routers configuration, I found that a Port-channel is in L3 and it is in VLAN490 as below:interface Port-channel1.490 description To_CP01 encapsulation dot1Q 490 ip flow monitor NETFLOW_MON input ...
Hi.I have one Cisco ISR 4321. This is a brand new router and I am the first owner.I have encountered the following fault since the first start up:It keeps restarting at random intervals. Sometimes after 10 minutes but sometimes it lasts for 2 hours.T...
Can I upgrade WS-C3750X-12S-E with c3750e-universalk9-mz.152-4.E10.bin ?I need fix a bug according to this article CSCud01798. It says to "upgrade to 15.0(2)SE2 or later to resolve this issue".So I decided to upgrade to the latest one. I am not sure ...
Hello,I have a topology as below. Switch101 and switch102 are vPC peer, and switch201 and switch202 are another vPC peer. All the switches are Nexus 93180-EXHostA is connecting to swtich101 with a orphan port (port-channel)HostB is connecting to swit...
If there are 2 switches stacked uplinks given to each 2 switches with 2 ports each, say eg port 47 & 48.Port 47 & 48 are created LACP for each switch Then what is the use of stacking here for redundancy?I am newbie. Please explain.
Recently, the company I work for closed down a data center, and I ended up with a bunch of equipment, one of which is a C9300L-48P-4X-A - CISCO CATALYST 9300L 48P POE+ switch. It has some configuration on it, and I just want it to be a dumb switch wh...
Hi,we are using the Cisco ASR1001-X as core router on our ISP network. For the management of the CPE I set up a TR-069 ACS server. For testing purposes I configured the ACS URL manually on the CPE, which works fine.However I'd like our ASR to pass th...
I tried ctrl + Crommon 1> confreg 0x2142rommon 2> resetbut he didn't accept the reset the i restart the router with power button then i found router suck in below could any one help me how to solve this issue i restaert the router 2 time using powe...
From where to download the cisco images (Router and L2,L3 switches) for eve ng and which image will work good.Below is the list mentioned in eve ng but what is the proper way to download these imagesDynamips (Cisco IOS emulation)c7200-adventerprisek9...
I have a setup in which i have 2 routers connected to same ISP A both via default route pointing towards ISP for internet.Now we want to add another ISP B on both routers however that ISP will use BGP with RIPE IP address over the internet.Now we wan...
hi all,when i try to ssh in to a switch i get a connection refused on port 22ssh robert@10.110.10.4ssh: connect to host 10.110.10.4 port 22: Connection refusedthanks,rob