Hi, I am migrating an installation to CUCM from Mitel. There is an E&M link to a PAGA system (Spector/Lumenex) from the Mitel. I have a VIC3-2E&M which I have tried in a VG320 and an old 3925 to interface with the PAGA but I can't get it to work. I d...
Forum Posts
I am planning on upgrading Unity Connection from 12.5(1) to 15.Specifically from 12.5.1.19017-4 to 15.0.1.11900-14 I am thinking an in-place upgrade.But first I need to increase the RAM.Disk and CPU are ok. Just wondering if any caveats I can expect?...
Resolved! TLS handshake failure CUBE to ITSP
Hello, I am trying to establish a TLS SIP trunk to my ITSP. The ISTP have a bit of an odd setup in that I need to send outbound calls to one peer IP but I receive calls from them on a different IP. The outbound part seems to work fine with TLS enable...
CUCM 14SU3, SBC 8300 v17.09.04a We moved off TDM PRIs over to new SBCs for all calling. Testing since November with no issues. We ported our DNs to the carrier on 17 April from our old carrier and I set up inbound calling to come in across the SIP ...
I am running CUBE on a CSR8000v, I would like to check what MOS score I'm getting to confirm call quality. The calls are all SIP G711u codec. I have been looking at the guide:Cisco Unified Border Element Configuration Guide Through Cisco IOS XE 17.5 ...
Hi I have cisco 7970G connect to non cucm, the phone is on but dont receive any number, Would you help me?
Hi all,I'm trying to configure a trunk between my Cisco CUBES(ISR4431) to Genesys Cloud for a new implementationHas anybody made this challange ?It works with SIP/RTP and SIP/SRTP but when i switch to SIP with TLS it fails.TLS Handshake between Cube ...
Hi! We were given cisco 8841 phone with our phone company for our business. I bought a cisco 561 headset and was hoping to use it but cannot figure out how to. After lots of research, I think it will only work if I have the ability to log on cisco c...
I have an Expressway-C cluster of two servers for MRA, running version X14.0.3The subordinate server is giving a warning. Application failed: An unexpected software error was detected in smartlicenseget[8714]: unknown reason It appears related to Sma...
Hello everyone! Our new ITSP send in INVITE as display info the calling number and we need to remove it if possible on the outgoing dial-peer. In this example, here the incoming SIP message: Here the outgoing how we would need it: I think it shou...
I am trying to use a Desk Phone instead of My Computer for Calling in Webex app with UCM. I have this working on several systems, but this latest one I cannot get to work. CUCM version 14.0 SU3.Using the latest Webex app. The End User is the Owner of...
HI, does anyone know if the receptionist client even still exists, if so then where abouts is it? Everything online seems to be out of date... Thanks.
HELLO GUYS,I have a issue when I configure webbridge3 on CMS but when I want to access webbridge give me this error:System is currently unavailable.Please try again later.I will appreatiated if anybody can solve my issue.
Resolved! cisco meeting server
Hello Guys,I want to implement to CMS on my organization. I want to know I have to use Express way-E and Expressway-C and CUCM in my senario (mandetory) or all of them are optional.the next question is that can I use ASAv instead of expressway-E and ...
I have deployed CUAC-A and am trying to find a way to bulk import a personal directory for an operator. (CUAC-Advanced) version = 14.0.2 I know operators can add their own personal directory where they can add contacts, one by one through the operat...
