Hello,We have a CCME and H.323 VoIP trunk to local ISP. When we are trying to call through this H.323 trunk we are receiving the name of ISP's SBC. So how to restrict this name on CCME?Thank you,Svilen
Hi,We're pushing a CiscoIPPhoneExecute to a phone. The phone requests the page (CiscoIPPhoneText) in the execute request.The requested page needs to allow the user to respond to a question. If the user doesn't answer to the question, the question sho...
Hiii,,During installation of CRS 5.0 it will ask you to enter AXL user and password and when you check it in the document it will tell you the user that you created in CCM 6.0. PLZ I want to know that the AXL user consider as end user or application ...
Hi Expert'ssomeone know how to turn off the next ISDN messages from terminal monitor:VoIP-GW-02# terminal monitorVoIP-GW-02#110000: Dec 18 20:24:52.255: %ISDN-6-CONNECT: Interface Serial0/1/1:1 is now connected to 22904270 N/A110001: Dec 18 20:24:52....
I have two identical 7941 phones with duplicate firmware versions communicating with the same CM on one of them the time is 5 hours fast.Any ideas, i have factory reset with no luck
Hi, all. I have a question about the AXL,I want to change the locale from English United State to Thai Thailand but, I have no any idea which funcion. I found the updatePhone, but it seem to many parameter. Please kindly advice me.
Hi experts,,If I have some links for IP PHones services and I want the phone to access that page throught the internet what I have to configure in the CCM 6.0 is the DNS is enouph or I have to configure the proxy url, but when I configured the proxy ...
Hi everyone,just a question about COR and CME.this is a test lab and im trying to have one phone make local calls only and the other have full access using COR.this is my configdial-peer cor custom name Unrestricted name Local !!dial-peer cor list Un...
In Call Manager, is there an easy way to create various Page Groups so that a page from a Cisco phone can be broadcast to a predefined group of Cisco Phones? This isn't evident to me.Thanks.Newbie
Hi guysi have Call manager 6.1 with around 250 Cisco IP Phones 7941 and 7936 recently the corporate changes the extension plans and implemented new extension that caused the old extension history calls are still in phones i did not want to clear one ...
Has anyone ever used the IP Communicator as an agent phone? I'm having some problems when an agent transfers a call the agent goes into not ready. Any advise would be appreciated.
Hello,Not sure if I'm in the right area or not, but I'm looking for some help on old school fxo / fxs setup (NO IP PHONES).The cisco sales department wasn't sure what exactly I was going to need, and an engineer never got back to me, but basically I'...
Hi,I wanto configure Boss & Secretary feature in ccm 5.1I want if someone call from outside on a Boss DN that call should go on DN configure for his/her secretary first and if secretary dosen't picku call after 3rd ring call redirect to Boss.I have ...
we are using CUCM 6.1 and we have developed a billing system for CM to bill the calls based on authorization codes. but once the ip phones are on the SRST mode we are not able to get the authorization codes. Further more we are facing same issue when...
I'm trying to set the ldapfilter string in UCM 6.1 to filter based on values of the IP Phone number attribute in Active Directory. I can get UCM to accept the filter string, but it doesn't change what gets imported. Here's the string:'(&(objectclass=...
