How can we add and integrate mediant with cisco call manager ?Can you have doc for this kind of setup ?
How can we add and integrate mediant with cisco call manager ?Can you have doc for this kind of setup ?
how do i make the jump from 2000.4.3a-sr9 to 2000.4.4sr2?im currently running CCM 4.1.3 and will soon upgrade to 4.2.3 or the latest CCM 4 version.thanks in advance.
computer account for unity is corrupt. I need to add back to domain. once added back, will anything need to be done in either unity or callmanager to see ports?also what is rebootd first publisher or subscriber CallManager 3.3? THANKS
I had a customer on the phone with Castelle Fax Press technical support (they don't seem very knowledgeable of their equipment I noticed) and had an issue escalated to Castelle development who told me they don't have an option to turn off ECM or set ...
I work at a small residential school and am trying to create a wireless phone system for the dorms we have. I want to use the AP1231 wireless access point to connect our 7910 phones, but don't know what hardware I'll need to make the connection poss...
We have a customer with a Brother 4750E fax machine. They are unable to fax multi page documents to our fax machines attached to ATA186. They are able to send with out a problem to other non-ATA fax machines. No one else has mentioned a problem. Any ...
I am trying to write a custom IPCC report that pulls only external calls (inbound and outbound). I need the external phone number, call time, talk time, direction (in/out), and what extension the call finished on. I've been looking through the IPCC...
Hi when calls made outbound, the ringback have echo, and not all ringback tone, for example: it is a total of 5 ringbacks to an example number, out of that 1, 2 have echo, then 3, 4 not, and echo on 5 and it changes that order with other attempts to ...
Users at a remote branch connected via wan to centralized ccm 4.1.3ess122.1 cluster are randomly having transferred calls getting a fast busy. The same is happening with call park. What appears to be happening is that when the call gets to the poin...
HiIs there a way to quickly resync time after changing ntp on the CM. Typically I wait to the next day to see a change but was wondering if there is a faster way to resyncI already tried 1. resetting a phone2. restarting NTP service on the clusterthx
What is the purpose of boot-start-marker and boot-end-marker and how do you apply them. I couldn't find on enable, prviledge, or global config mode. I am running 12.4(7d) on vg224.Thanks,Yo
This is a bit of a strange setup, so I'll try and explain it as best I can:We have a CallManager setup running 4.2(3)sr2b. The voice gateway router is a 3725 running 12.2(8r)T2 that has a T1 PRI to an Avaya PBX. Since we've not completely rolled ou...
Hi,I'm new to IPT and am trying to get my head around a few things.An SRST router is usually used to provide fail over for remote sites during WAN failure etc, however can it still be used effectively in a head office scenario?Ie. if the voice router...
I downloaded the ES for CM6, changed the file name, FTP to the Publisher and now what? I thought it would just upgrade, or do I need be at the console to reboot the server and?Thanks!
Hi, I have a problem after reload the router 2801 with CME. The configuration was saved(wr) but now it doesn't work. The customer says that there is a delay about 12 seconsd when they try to establish an outgoing call. I checked the configuration and...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-03-2025 11:25 PM | ||
06-04-2025 07:12 AM | ||
04-19-2025 04:07 AM | ||
04-02-2025 09:00 AM | ||
03-22-2025 10:34 AM |