Other Collaboration Subjects

I am about to install CCM on MCS-7825-H2-IPC server and received following field notice:http://www.cisco.com/en/US/customer/products/sw/voicesw/ps842/products_field_notice09186a00806de501.shtmlfrom reading it, it appears that the 2000.4.3a OS resolve...

We want to setup connectivity between our Call Manager and our providers SIP gateway. This will be passing through our ASA 5520. The SIP gateway has a public IP. Has anyone implemented a similiar configuration? What needs to be configured on the fire...

I am in the design phase of a new project and would like to hear some inputs on the same. I will have callmanager cluster, unity (with fo), meetingplace express, mobility manager, ipcc express (with ha) all centrally colocated in a data center. No ph...

Hey,got a request yesterday from a customer. they have a BCM (NOT SURE WHICH) that they have connected to a cisco router. they have two remote branches running other bcms. all are connected via frame-relay link. they need to perform QOS on the router...

CCM 4.1 and I have a customer who is a hospital. They would like the ability of some type of off-hook alarm similar to the Nortel's Off hook alarm system(OHAS). The scenario is that a resident knocks there phone off hook during an emergency but is un...

Hello,Can anybody tell me if ccme 4.0 supports the 7941 and 61 with german "surface"?And how :)Best Regards,Marcus

Hi all,I have a new 2851 running 12.3911)T101 MFT T1 in the MBRD slot 3CM 4.1.2 with a publisher and subP 10.1.8.16S 10.1.8.15I will past the config in here, but here is the issue, the Sub as the Primary will not register even though the Pub is fine....

When pushing text to a phone and also using the Play: URI to activate a ringer, it appears that the Play: occurs as if the Priority is always 0, even if set otherwise.Here's the execute:<CiscoIPPhoneExecute><ExecuteItem Priority="1" URL="Play:Chime.r...

http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a00800945bd.shtml#testtoneI've been able to generate tone with older 7940/7960s, but I can't get the Tone Softkey to show. **3 shows "Debug Mode On" but during a call I don't...

I need a way to bulk change all Callmanager users to individually unique passwords for each user. It appears the only password change option is to use a single password for all accounts. My only working option seems to be to delete all of the users, ...

Hi everybody,When I power up Cisco IP phone 7970,these button flashes in sequence:headset, mute and speaker. Then line keys start flashing green in sequence. Then headset button start flashing green.After 15 seconds everything stops. Switch Catlyst E...

Can CME 3.4 be configured to have a SIP trunk to a VOIP proxy?

Hi all ,I am upgrading configuration of my cisco 2610 Voice gateway ( with 4FXS ports)I have prepared the new configuration for voice gateway, My question is thatIs my configuration works with this release of IOS.Below is the proposed new configurati...

I have IPCC 4.03 coresident on CM 4.13 (lab setup). I have the initial setup of IPCC completed (this involves two steps)a. Login to IPCC with Administrator and ciscocisco as password, install the license files, choose an administrator (from global di...