Other Network Architecture Subjects

On our core network devices, we are running HSRP in a number of spots. I'm of the impression that we'd need to set the syslog level to be at least level 6 (informational messages) so that we would see any HSRP state changes. I've confirmed that the l...

Hi,When testing one GE PortChannel, formed by two GE Physical links, with two Smartbits 6000B, we can see that when the PDU is smaller than 300 Bytes the 3550s can't forward all the 4Gbps (2Gbps bidirectional). Worse than that, the Smartbits say than...

Is 2621 DRAM compatible with the 2621XM platform?

When I order WS-F6K-MSFC2 upgrade kit, is their anything else that I will need to order beside the software?Is there anything else that is manitory so that I will have layer 3?

What does this command mean ? It has been impossible to find

I have a cisco 2600 with a c2600-is-mz.122-23a.bin system file. This router has several sub-interfaces set up for the different vlans. Each vlan is encapsulated with ISL.The 2600 router connects to a C2912MF-XL switch with IOS version 12.0(5.2)XU.T...

Hiya, I have the following kit:- WS-C6006 Software, Version NmpSW: 5.5(8) Copyright (c) 1995-2001 by Cisco Systems NMP S/W compiled on May 15 2001, 15:06:17 System Bootstrap Version: 5.2(1) Hardware Version: 2.0 Model: WS-C6006 Serial #: TBA03360148 ...

Hi, folks!I connected the twelve switches 2950G like file attached.But I can´t pass more than a VLAN from sw-1a to sw-2a, sw-3a and sw-4a, the same from sw-1b to sw-2b, sw-3b and sw-4b.So, I need the same two or more VLANs(id 1,2 e 3) in switches sw...

attached document: i need the LAN A user to access the internet from Router C.I need the routing and natting command on each router. can any body correct me-------------------------------------Router A---------Ip route 0.0.0.0 0.0.0.0 bri0Router B---...

Hi all.We perform broadcast storm control on our 6500, with set port broadcast command.Now we have added a 10/100/1000 line card, and if we perform the command above, it print an errorcommand not supported on this moduleAny idea?ThanksDaniele

Hi allCan someone please answer me this.I have 2 networks, one is 10.0.0.0 class A, the other 172.19.56.0 class C. How come when I put a static route on the 172 router, the route being 10.1.0.0 class B going to the router on the 10.0.0.0 network it ...