i want to buy a new pc computer fan to instead of the orignal fan of the catlyst 4006 's machine case.who can tell me the parameter of the fan (such as : diameter\current\voltage and so on )thanks a lot.
Hi there,Just some basic question, I still dont understand why on certaion condition, whereby I have to use extended ping to verify the source and it can be pinged.If I use ping command, no reply. It's becuase of ip reachability issue?What actually ...
Recently cut in a 4503, the 3550 facing this 4503 now shows PAUSE outputs when traffic exceeds 50 mbps.The fix for now is to direct traffic towards another 4503 in our network and bring the traffic back via SONET. Problem is the SONET circuit is an O...
Hi!!!I have problem with a catalyst 3548 switch, this switch has the image c3500xl-c3h2s-mz.120-5.WC9a.bin, when I tunk on the device or when y reload it, this message appear constantly and I don’t know why but I am sure that isn´t normal and culd af...
When trying to save the running-config to startup-config, the router gives the error "NVRAM Verification Failure" Also when trying to complete the command Show startup.[OK]NVRAM Verification FailedDevice#sh start%Error opening nvram:/startup-config (...
Currently, we have 1 server running LMS 1.3 on Solaris 8 and plan to upgrade LMS 2.2 on either Solaris 8 or Windows 2000. We also have another server running LMS 1.3 on Windows 2000 for a different location. What is your recommendation on upgrading...
The following scenario has to be built for our network.Site A:A cisco 2620 with IOS 11.3 that is connected to our internal lan and to the internet (ISP A).Site B (remote location):A cisco 2620 with IOS 11.3 is also connected to the internet (ISP B) a...
I've recently taken a position at a new company, and I'm in the process of wrapping my brain around some new concepts. In my previous position, I rarely (if ever) had to deal with any wan equipment. One concept that seems to be giving me trouble is...
I have a remote site where I have a Cisco 3640 router with following cards:Slot 1: unused FE, Unused TR, 1 WIN card with active BRISlot 2: 2 FE with one FE used, 2 2 port WIC with 1 serial used (Frame Relay T1).When I add another Frame T1 to a smart ...
HI all,We have a new 6509swith come in with IOS we need to get it on CATOS.Does anyone have a documentation to convert from IOS to catos on 6509 with sup 720 (MSFC3)thanks in advance
Hi,I need to know if the standard RPS cable from Cisco are available in different length or not ???I've to connect a switch to a RPS, this is already used by others switches, but the switch is in another rack located about 5 meters far from the RPS a...
The design guidelines say to not do CRTP on links over 2 Mbps. What I have is a frame-relay provider that delivers the link to me on a 10 Mbps ethernet connection. Can I configure CRTP on that link if the actual link speed of the circuit in the clo...
