Other Network Architecture Subjects

Hi, we have a 2611xm and we have three subnets that pass thru it. Our problem is that we want to separate the subnet traffic so that they are "routed" thru the router and not "switched". Currently all subnets "see" each other and we want to stop that...

Hi all, The router at my cleint location using EIGRP routing protocol is having T1 link, but bandwidth(S0) is configured as 1544000. They will be getting soon T3 between the same locations and may want to use the existing T1 link as Backup and with ...

In my router .why have this commad??it is copy run strat.Router#copy run stratDestination filename [strat]?Erase flash: before copying? [confirm] Imprudence to enter .my flash is erased.. Now ,I want to pour the IOS again. But the system clew that t...

I understand how to add a new user and assign that user to an existing "role" (eg: System Admin, Network Admin, Operator, Approver, Helpdesk, etc.) but is it possible to create/modify a Role to NOT have access to CiscoView? Or can we simply disable t...

What’s better:Hybrid IOS & Single Router ModeOrNative IOS & Enhanced High System Availability?

I have two 7206vxr's which I'm attempting to setup w/ HSRP.On routerA I have the following setup - FYI the two routers can ping each others "real" ip address and both "real" ips reside on the same subnet and vlan.RouterAinterface Port-channel1.1 desc...

Dear all,we are using DFM 1.1 Build 16615.Is there a free upgrade available ? Where can it be found ?Thanks.

Help says that the SystemObjectID is not listed in oid2type.conf file.What should I add to oid2type.conf for working with my Model number: WS-C3550-12T ?SystemObjectID ist ".1.3.6.1.4.1.9.1.368"Thank you

Help says that the SystemObjectID is not listed in oid2type.conf file.What should I add to oid2type.conf for working with my Cat 6509 ?SystemObjectID ist ".1.3.6.1.4.1.9.1.283"Thank you

6509 running Integrated IOS 12.1(13)E6 (c6sup22-js-mz.121-13.E6.bin). In the config : mls flow ip full.1. sh mls ip so 127.0.0.1 countDisplaying Netflow entries in Supervisor Earl Number of shortcuts = 12164sh mls ip so 127.0.0.1Displaying Netflow en...

Here's the problem, I have a 3550 with one WS-G5484 SX GBIC and a 6509 with a WS-X6324-100FX-MM MTRJ blade. Is there a way I can get the the WS-G5484-SX to connect to a port on the WS-X6324 blade? Can the SX GBIC be bumped down to 100Mbs? or are they...

Hi, i´m going to implement vmps in my network, i have a cisco 6509 as server and 15 cisco 3550 as clients, i want to know, what happen if my server is down, the clients lose information or they maintain the last information (vmps database). can you h...

I have a 6509 with 2 Sup720's. When the Primary Sup720 failed, the secondary tried to come on-line, but would not learn ospf routes. when we eventually rebooted the 6509, the original Sup720 came back on line. We are running IOS Version 12.2(14)SX...

Does anyone know of a network monitoring tool that will report on interface/port errors??(ex. On catalyst 6500, issue 'show port counters' will output algn errors, collions, etc... or on 7200 router, issue 'show int' will return input errors, CRC etc...

Hi This Switch is in 84 Percent Of utilization of memory an 80 of CPU.when i type the show proccess cpu the More consuming proccess are:- Port Status Proc- Address Deletion- Address LearningThis Switch have a dot1q Trunk configured on one portand ...