Other Network Architecture Subjects

I have configured Dialin access for remote users on 2620 router using 8 port Analog module card(NM-8AM) with IP address assigned Dynamic(from the Pool of IP address) and its working fine.Our customer wants to have static ip address assigned to each m...

Hi,I have a problem with some switches, because the users are complaining about the delay in the packet transmision through the net. They say that ping packets are taking more time to arrive than before. I've been checking the switches statistics and...

I've created a filter for ATM messages that have a facility of FIB, a severity of 4 & 5, and a Mnemonic of PUNTINTF and NOPUNTINTF. This had to be done in the advanced setup of the filter, since FIB is not listed in the SysLog message types field in...

Hi,Cisco recomendation is not to change threshold setting , however they recomend to use default value. We have a simple network running OSPF, DLSW , SDLC protocol. We are not seeing any tty traps. However, we have traps enable on the global configur...

Trying to get DLSW+ to transport Netbeui from one Ethernet segment to another. This is a lab environment so I can freely mess with the configurations. On each Ethernet network there are two PCs running Netbeui. On each network the PCs can map to shar...

Is there MIB´s for manage NAT?if there is, in the snmp agent of router, is there commands for watch your manage?

I am part of a staging project which includes several 6513s with Sup2 cards. One of the 6513s has come from a Proof of concept area and I have found that on the secondary MSFC, there is no image in the bootflash for it to boot from.I can force the MS...

We currently have a remote access environment that is incurring very high call costs. Users dial in to a freephone number via Async or BRI to AS5300. They then establish IPSEC connection to VPN3030.Our supplier have configured dialer idle timeout bu...

Hello,I’ am using a CAT4506 with SUP II engine. CiscoView 5.4 does not support this configuration yet. Do you know when CiscoView 5.4 will support the configuration?Luc Steens

Hi all,I just installed Ciscoworks 6.0 for windows as default setting.I typed ID "admin" and password "admin"but I cannot login cisco view.I don't know the reason. (OS is windows 2000 professional, java plug in is ver 1.3.0, IE is ver 5.0)HELP ME !!!...

Our customer ordered an internet access via 34 mbps. Provider is "Deutsche Telekom".The router (Cisco 7204) will be administrated by the customer. Therefore, we need to know which interface we should buy: PA-E3 or PA-A3-E3. Or is it common to use a ...

Hello,I have a Cisco 678 DSL router, and have very little experience with Cisco products. I changed to Static ip's recently and need to remotely access one IP. I have a client software that should connect, but it needs to have two ports forwarded. ...

A 4006 switch is connected to a 5500 switch and the following error message keeps coming every 5 minutes.The Native VLAN settings are correct.We have set cdp disable command on the switch also.%CDP-4-NVLANMISMATCH:Native vlan mismatchdetected on port...

I have a VLAN that belongs to 2 different subnets e.g. 10.x.x.x and 172.x.x.x. These 2 subnets belong to 2 different NT domains and the domains are not trusted and also we do not want to go down this line. A NIC card in the VLAn has as its primary ...

My question is about the Alarm Port of the Cisco 3660 chassishttp://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis3600/hw_inst/hw_notes/nebsetsi/3660kit.htm#xtocid4I can't find more docu about it, so the question is how does it work?Does...