Hi I have a 3600 router with c3640-is-mz.121-2.T.bin, and catalyst 3524xl with CatOS enterprise editon and when reload the router the secondary ip no up to the running config. and it gave the follow error:Secondary addresses not allowed with negotia...
How do I configure remote loopback for a E1 link on a cisco Router. I could do it for T1 using the FDL. But for E1 I can't find any commands for remote loopback configuration.Any help related to this is appreciated.Thanks
If you are getting erros on one ISDN B channel and not the other, what is this more likely going to suggest as to being the fault? The line or the router?
When I transfer a IOS from a tftp server to a 2501 router, when finished, it told me:"!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!![OK - 7510772/8388608 bytes]Verifying checksum... invalid (expected 0x1805...
What does it mean when I get the message HighQueueDropRate on one of the MSFC interface on a Catalyst 6509. I ahve search all of the Cisco Site but I cannot find detailed information.Thanks
My customer wants to transport frame-relay packets end-to-end between Telematics packet switches , as well as running IP traffic over the same frame interface. The connectivity is as follows:T-matics --- 3640 ------------------- 7206 -------------...
Hello,i have one cisco 2620 router with a 4 Port ISDN WIC. This Router is a backup router. There are two main routers. All three are running hsrp. The isdn Router is the standby router in the hsrp group. The problem is that the 2620 is dialing someti...
Does any one know of a utility which can be used to take periodic back ups of runnnig configuration from a networking equipment such as a router which out human intervention.Right now we have the policy to save the latest copy of running configuratio...
Hi AllI have two 3550 with the emi image on, and I am doing intervlan routing on them, or hope too soon. Can any one tell me, If I create a WAN vlan and run hsrp between the two 3550's, and then in that vlan put all my wan routers, I would like the r...
My customer is asking me, if and how can he put a channelized access DS3 into our network to support 28 T1's across our global network. I know that we as a network provider support these type of circuits but the customer wants to know how he would co...
HiDoes Cisco 1720 ver 12.2(13) support NAT - Static Mapping Support with HSRP for High-Availability ? I saw in the future navigator only 1710 should be supported ? Is it ? I'm asking this since the commands are available on the 1720 but it doesn't wo...
what is the best possible setup for our Sales people who want to make a connection to our network. Let say that I want to begin from scratch. I want VPN and Firewalling. But the remote users does only have their internal modem or a Cell phone connect...
Along with 1000 Windows based machines, I have 5 Novell servers and 50 older Mac's. What capabilities of the MSFC2 can be used to control these broadcasts?
