I am routing across eth0/0 and eht0/1 to machines on the opposite networks. my 10.1.0.0 network uses 10.1.0.1 as the internet gateway and this works fine. My problem is that my 10.0.0.0 network cannot get out on the internet. what must i do for the 1...
I have a Cisco 2500 series router currently running Version 9.14(6)[fc2] which is an older version. I need to update it to version 11.2 but am having trouble figuring exactly what I need to do (new to this). Any advice or help would be appreciated. T...
Hello,InnoculateIT requires port 42508 to be open. How can I check if network traffic is getting across using that port? How can I configure the router if its not?Thanks,Larry
This message is (possibly) more of a philosophical question than a plea for help, or at least I thought I would ask before logging a TAC case via our support provider.We are using 7206 VXR router hardware (256 MB DRAM, NSE-1) for the gateway hosts on...
HiI would like to know if is there any way to open l2tp tunnel from a LAC to LNS when using Radius server , But I would like the tunnel to be opened base on username ( not DNIS or CLID or Domain) only username & password.If it possible please show me...
HI, Got this error msg on 7206 VXR.Dont know what it means.router is runnning Version 12.0(10)S.Any help will be appreciated.%SYS-3-CERF_RECOVER: PC=0x60723BE0, Origin=L3 Data , Phys Addr=0x035109ETIAAditya
I have a Cisco 2600 router with two FETHERs. 0/0 is connected to a closed network and 0/1 is connected to our regular corporate network. I have setup a firewall PC between the closed network and the corporate network. When I connect the firewall P...
Hello. I've some questions about HRSP.I'm working with 2 Cisco 3640 and each router has 2 PRI. My idea is to implement HSRP but I've this doubt:With track HSRP if a PRI 1 goes down but the other PRI 2 in the same router is alright , the users connec...
Is there a document on CCO that discusses the use of Type 5 (nonreversible MD5) encryption of CatOS passwords in the configuration file? There are documents on CCO that discuss the security of IOS passwords (enable secret, line, etc.) but none that ...
We are using a AS5200 with about 100 dialer interfaces for clients who call in to it. I would like to be able to track connection history over a week, month, or what ever possible. We do not use AAA or Cisco Works. We are running an AS5200 with 12...
Dear Sir:I've one router with such syslog configuration:logging history debugginglogging trap debugginglogging facility local4logging source-interface Serial3/2logging 10.1.2.2When I use some debug commands: i.e. debug aaa accounting, debug aaa autho...
I have router1 connected to router 2 through service provider , in both the routers loopback ip address have been provided from the servive provider, the link between the two routers are not connected directly , i.e it goes through a service provider...
Hi there ...I have a problem in STP convergence..There are three types of switch. One is Cat 6509 , other is Cat 2924, the other is Cat 3200.Cat 6509 and Cat 2924 support uplink fast but Cat 3200 doesn't.Actually Convergence Time takes almost 2 min....
