Other Network Architecture Subjects

Dear experts ,,We recently purchase a brand new cisco 2950 switch , but when i conncet its console port with my serial port for configuration via hyperterminal , its not shows me anything and shows me blank screen , i gives the hyperterminal paramete...

Hello,Can I use 2 SDSL lines together?We have 2 SDSL lines and each line has couple of public IP addresses.We want to merge these 2 SDSL lines together using a Router so that we can optimize our bandwidth. Is there any Cisco or other router which has...

How can I check the port usage on a Cisco 2600 and 1600 router series. How can i check the data line usage and what is the difference between port and line usage if any?

Is it possible to NAT to one address on one outside interface and another address on another outside interface?Thanks

Do the 2950 switches offer enterprise software like the 1900? After looking at the Cisco website documentation it says it offer IOS intergration. Is that the same as saying Enterprise IOS?tony

I have recently upgraded a C2900XL to IOS Version 12.0(5)WC3b. When I try to use CMS via a web browser I get the first logon prompt and that goes fine but when it tries to pull up the homepage of that switch it prompts for the password again and the...

Hello!Can anyone help me to configure one Cisco 3662 (IOS 12.1) to act as ntp server for my network?At this moment i just have configured the cisco to get syncronization in one external NTP server and it works good.Now I want to configure my router t...

Hi, here is the problem. We are having our central office move here into our building next month. We need to keep them on a seperate network for security reasons. We have a 2621 router that they currently use and the only available ports we have h...

I have a core router trunking with a HP switch. The switch and router have 3 vlans and use IP and IPX. IP works fine and IPX allows login and viewing, but each time you try to open or copy a file the server claims it is unavailable. Has anyone ever...

I have a cisco 1710, can you connect the ISDN port on the router to the isdn line with a normal cat 5 cable?

Good afternoon;I am being discourged to buy the NM-16ESW by my hardware vendor. He states that he has never been able to get it to work correctly.The senerio I am looking at - 2621 with five networks behind it1) Fe0/1 network 10.101.XX.0/24 VLAN62) ...

I have problem to pass DLSW traffic in a dot1Q trunk between a 1751 and a Catalyst 2900.Someone know a IOS for the 1751 that support that ?Thanks for all !!!

How can udp packets can be enabled on a CMTS so that stock datas can be forwarded over a cable network, which can be used by end customers spanning a wide area with their cable modems.

We have nat configured on a 1700 series router with 2 public addresses given to us by our ISP. We have been running this way for 8 months. Recently we had a need for 2 additional addresses but the 2 new ones the ISP gave us are a different network nu...

With 5 Catalyst connect through Gigastack.Can I connect them alternative one with port gi 0/1 the next with port gi 0/2 , the next with port gi 0/1 and so on ?To my customer I had some problems perhaps about STP.In fact if I entered sh spanning-tree ...