Other Service Provider Subjects

ASR 1002x %CPPOSLIB-3-ERROR_NOTIFY

Hi Recently we configured an Hierarchical QoS for our PPPoE clients. After we send 2k users to 1002x, we got the following message on the router: Dec 2 16:43:45.493: %CPPOSLIB-3-ERROR_NOTIFY: SIP0: cpp_cp: cpp_cp encountered an error -Traceback= ...

question about a switch in my practice lab

I have recently acquired two 3750 switches which I thought would be great to have as layer 3 switch for my home practice lab, but from what I found out today is that they only have a base ios image and not enough ram/flash to upgrade the ios. The 2 s...

Understanding how unused bandwidth is distributed by bandwidth remaining ratio

Hello all, I have a question regarding how unused bandwidth is distributed in each class-map when bandwidth remaining ratio is configured. Let's take the following example below. policy-map PARENT_POLICY class class-default shape average ...

ubr10K Wibeband description

Hi is there a way to put a description on bonded port exemple: C5/1/1/UB 155 155 155 0 0 5 0 0 0 0 ( How can I put description here) C5/1/1/U0 10 0 0 1 1 0 0 0 0 0 PRIN_LAURI 25.2/579-597,615-633/8DS/64q C5/1/2/UB 200 20 20 0 0 20 0 0 0 0 ( How c...

Resolved! ASR-9010 - 5.3.3 - TACACS Authorization loophole

Good day, I hope someone can assist.I have denied the command: "route-policy" with arguments "default_policy_pass_all" on our Cisco ACS. When someone tries to create/edit this policy they enter "route-policy default_policy_pass_all"They then type "en...

BGP - Idle (PfxCt) now stuck in Active state

HelloI have a direct peer which has the following state:Idle (PfxCt).To clear this, I did: clear ip bgp neighThe thing is, it went to Idle and is now stuck in Active. I even increased the max-prefixes but it is still Active.I can ping the neighbor.An...

vpn konzept

hallo ...bin nicht sicher ob ich hier richtig bin.......es geht um ein VPN Konzept für die ZUKUNFTUnser bisheriges VPN Konzept legt fest das der I/O Verkehr über ein Interface geht......also vpn einwahl und datenverkhr über nur ein Interface.Sollte n...

Edit a route-policy on xr

I need to know what happens if overwrite a route-policy via cli or use a editot as nano or vim,the route-policy is used on bgp neighbor on productionI prefer overwrite via cli

PowerVu D9858 Firmware upgrade from running version R03.02.00

I have several 9858's that need firmware upgrades and have noticed that below 3.90 or so the GUI doesn't have a download function with in it. I'm not having any luck trying to find how its done. can access it via telnet but not quite understanding wh...

Interesting DoS attack that has no mitigation possible at the MSO level

Im working with a very interesting issue. Worldwide there is a BIG issue with Intel Puma based cable modems. These are in use all over the world. These ALL have a CVSSv3 7.3 rated DoS attack that cannot be blocked at the ISP of a MSO because the hard...

What is the update software for Cisco USB Webcam Tandberg TTC8-03? S/N A1AP4SE00790?

The unit start with microphone when green light. Sometimes only show orange light. I tried to update with s60000cc1.3.0.exe, s60000cc1.4.0.exe, cc1.5.0; but the issue persists: no video. The OS is Win7 Home Premium. The unit is identified by the syst...

Query on Segment Routing

Hi Cisco, I am working on Segment Routing and got few doubts. 1 : Release in which all the feature of segment rouing we can use in IOS-XE and XR both ? In many of the links I see that its mentioned: - Segment Routing Adjacency SID Advertisement ...

Resolved! How to show memory(RAM) con SCE8000 ?

Hi, How to show memory(RAM) utilize on SCE8000 ? I'd try to search about 'show sce8000 memory command reference', but I can find nothing about command to show it. All I found is about, CPU Utilization / memory configuration / show applications slot ...

Problem when loading the line card (Error TCAM)

Hello.Suddenly there was a problem when loading the linear card 20xGE on the ASR9001s router.When loading in the console the following messages fall out: LC/0/0/CPU0:Oct 10 15:36:43 : prm_server_ty[306]: %PLATFORM-NP-0-INIT_ERR : Device BST memory ...

Cisco CMTS IPv6 configuration

I am facing issue to configure IPv6 in cisco CMTS.Our modem have three interface which has to obtain ipv6 address from DHCP provisioning server.We have created three DHCP pool of ipv6 address in dhcp server. and relaying from cisco cmts. cable modem ...

Other Service Provider Subjects

Forum Posts

ASR 1002x %CPPOSLIB-3-ERROR_NOTIFY

question about a switch in my practice lab

Understanding how unused bandwidth is distributed by bandwidth remaining ratio

ubr10K Wibeband description

Resolved! ASR-9010 - 5.3.3 - TACACS Authorization loophole

BGP - Idle (PfxCt) now stuck in Active state

vpn konzept

Edit a route-policy on xr

PowerVu D9858 Firmware upgrade from running version R03.02.00

Interesting DoS attack that has no mitigation possible at the MSO level

What is the update software for Cisco USB Webcam Tandberg TTC8-03? S/N A1AP4SE00790?

Query on Segment Routing

Resolved! How to show memory(RAM) con SCE8000 ?

Problem when loading the line card (Error TCAM)

Cisco CMTS IPv6 configuration

Meet and congratulate the February 2023 Spotlight Awardees!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

[BNG] send Username in acct packets on a non-authenticated session

Policing or Shaping

IOS-XR Python - Cisco Module

Issues with Cisco Software Manager Server after server reboot

The output of 'show subscribers imsi (ue-imsi)' in SAEGW shows 3 lines

How to get Cisco IOS XRV 6.6.3 qwow2 image in CML

Extend your MPLS Core to CPE

Subinterface Speed Throttling

PPPoE "Forwarded" state, how it is made ?

L2TP "Dataplane down" : PPP sessions not coming up