Cisco’s security team has released an advisory for: RV340 Series Small Business routers (PSIRT Notice) Fix for bug CSCwc53007- RV34x GUI not accessible – The recommended fix is to upgrade to firmware version 1.0.03.29RV082, RV042, RV016 (PSIRT Noti...
Forum Posts
Hello! This sticky-post will serve as a sign-post for incoming community members. Below you will find links to pages that you may find helpful. Virtual Assistant - Discover support content and options for your gearSupport page index - Contains a...
I have a brand new RV345. I have configured the WAN Port to have a public IP off of my main ISP router. I have a VLAN1 / base address 192.168.1.0/24. I can verify that there is DNS and other communications traffic from the TCP/IP services. Howeve...
Hello Everybody,I read about similar topics in the Community but I couldn't get through the problem.I set the VPN-SSL connection in my RV345, then I connect from internet using the VPN-SSL using both mobile phone and windows, I can ping the router wi...
I am trying to configure voice vlan on cisco sg250 POE switch which is connected to 4g router. If I don't use any vlan both data and ip phone works fine, but when I create voice vlan 100 either data or ip phone don't work. I want both should be worki...
Every time there is a new FW update from Cisco, the instructions suggest to do a factory reset to enable new features and ensure it works properly. Is it possible to import the old settings back into the new firmware or are they really asking us to g...
I am a sole proprietor and not a network specialist. I installed an RV340W to take advantage of dual WAN using two separate ISP's so if I lost one then the other would pick up my office internet traffic. But this has failed twice now. One ISP on WAN1...
I need to knowthe end of supportthe end of lifefor router 2911
In the static NAT under firewall I am trying to create NAT rule where when I give the static IP in public IP range tab I am getting error as it is the WAN IP of WAN2. How can I create NAT then. Please help.
I have been trying for 3 days to get any of the VPN client to site options on our RV340 to work. I have tried SSL VPN, L2TP, Client to Site... I have followed the directions provided by Cisco but there is no response at all when I try to connect fr...
I set up a single port forward on this router for UDP only and a couple of times it has stopped accepting connections. It seems like somehow it has got "jammed", because if I change the public port number on the rule, it starts working again on the n...
Hello community.I'm trying to add a firewall rule in the RV130W to block access to the router administration page. I'm also trying to add a rule to allow access from a specific machine. But the RV130W won't allow me to add rules in the same LAN subne...
Hi, I've set up an working PPTP VPN on Cisco RV220W.I can connect to the VPN with Windows 10 build in VPN service. But when I'm conneted to the VPN I can't see the server I want to reach.In a browser I can see go to local IP addresses like printers e...
Hi,I have a new RV340 router, but could not find a way with the GUI to broadcast a packet from WAN. With the CLI, I could add a static ARP entry with an IP having a MAC address ffff-ffff-ffff. But since the CLI is disabled, I didn’t find a way to do ...
Hello, how do i register my product? It is a new Cisco SG350X switch. I tried going to Product License Registration "https://software.cisco.com/software/swift/lrp/#/pak" , it is asking for PAK, i do not have this. I can provide the serial number, so ...
I have a RV-345 that is installed in a remote home. It is operational and I can access components on the network remotely via port forwarding. (not using the VPN) However I have one component that is not responding and I had hoped that I might be ...
