Routing

need some help here. Looking to move traffic shaping of my ASA5540 and onto my perimiter switches which are stacked Cisco 2960S catalysts. Doing this because ASA can only shape upto 150MB and my circuit just got upgraded to 450Mb my questions are: c...

Unable to ping my direclty connected client (LAN IP) from my router. Router Configuration as below Building configuration... Current configuration : 7288 bytes!version 12.3service timestamps debug datetime msecservice timestamps log datetime msecse...

Hello All I am tryinging to find where a port (7800) is being blocked withing a section of the network which does not have any firewalls. Is there any way i can try to find where the port is getting blocked in the network section? thanks

I have an 877 router with ios 12.4 (15) which doesnt work with ADSL2+. Is it possible to get a firmware or ios update without a smartnet support contract? same issue as: https://supportforums.cisco.com/discussion/10710861/cisco-877-dsl-line-noise t...

Hi. I have the following problem. I have my internet router redistributing the default route via EIGRP with a redistribute static. (Neighbors learn it as an external of course). Then I have a remote site, to which I only wish to send a default route ...

Not sure if this question should be posted here on this Community or not, if it needs to be moved somewhere please let me know. We have a 4500 L3 Switch which runs BGP and EIGRP. The switch is running cat4500e-UNIVERSALK9-M version 3.4 SG. We needed ...

Hi all,Does somebody know what mean messages below? I didn't find any information about it.*Jan 31 06:36:08.393: %VMAN-5-INSTALL_MEDIA_RETRY: SIP0: vman:  VMAN VM install media still unavailable. Attempt (9/10).*Jan 31 06:36:38.393: %VMAN-5-INSTALL_M...

I'd like to look at the IOS logs and noticed that the "show log" command only shows a few lines but it says that "console" and "buffers" messages have a 2K+ lines in it.  How do I see the "buffer" messages?  I'm assuming the console ones have scrolle...

Hi, I have redistribute static subnets in ospf but it is not working. Please review the configuration and help me.  . Router A router ospf 100 router-id 10.255.254.1 log-adjacency-changes redistribute connected subnets redistribute static subnets ne...

I am supporting network that is having a route issue and I want to be sure it would be the 3rd party device 3rd party router: 192.168.1.1/24 ASA: 192.168.2.1/24 RouterA: 192.168.3.1/24 Nexus: 192.168.4.1/24 192.168.1.1<--IPSEC TUNNEL-->192.168.2.1-...

Hi guys i jaave a cisco 892 isr i have been using it for a number of years on nbn (fibre) here in australia, i have recently moved house and had a new fibre connection setup but i have been lead to believe i could continue using my cisco router but t...

Hi All, I need to upgrade my router IOS from  Current IOS: c2800nm-advsecurityk9-mz.124-15.T1.bin  New IOS: c2800nm-advsecurityk9-mz.151-4.M10.bin My Current Rommon Version on Router is  ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (f...