Routing

Small doubt, but feeling something is wrong here. can anybody please explain me.Tracing route to http://www.singnet.com.sg [165.21.74.59]over a maximum of 30 hops:1 1 ms 1 ms 1 ms cm171.delta115.maxonline.com.sg [59.189.115.171]2 14 ms 10 ms 9 ms 10....

We have C2801 with (C2801-SPSERVICESK9-M), Version 12.3(8)T11. In our enviroment this Router has a Principal MetroEtherne line with a ISDN BackUP. This backup points to an AS5300.In some cases with this IOS and this equipment everything workds fine b...

Hi. I have 2821 and int gi0/0ip address zz.xx.yyy.66 255.255.255.240 secondaryip address zz.xx.yyy.68 255.255.255.240Then i ping zz.xx.yyy.66, return zz.xx.yyy.66 how i can fix it.

Hi 1.I need to upgrade the site bandwidth from 256kb to 1533kb what are the steps to do it ?2. Also will this change cause any outage on production network ?3. the project read like this This project is to increase the bandwidth at US...

Hi,We have a public AS with uplinks to 2 ISPs.primary path = normal setupbackup path = As path prependingI'm not concerned about the functionality as it does work as expected. I'm just wondering, when i have both neighbors up and everything is up and...

What is the actual difference between both these terms in the context when there are 2 links to internet.Does it mean both links would be used simultaneously in particular proportion or does it indicate either of links will be used one at a time,but ...

Hi all, I am facing an issue with NTP sycn between ASA and 3560 .My ASA is synchronizing with a public NTP on gig 0/0. A 3560( fa0/1) is conected to the ASA(gig0/3)On the 3560, ASA is the NTP server.There is L3 reachability between ASA and 3560 on vl...

I've got a mixed network with a lot of 1700 Series (1700, 1720 & 1721) along with 1841, 1861 & 2800 Series Routers at remote sites that all connect in to our central 3845 Router. We have had to expand our amount of routed networks recently due to ex...

Hi Cisco Experts, Based on my attachement, I need your advise on how to route packets from Frame Relay users to Leased Line users with different Gateway. If I will be using the 192.168.0.102 gateway, I can access the 192.168.4.0 network but not the 1...

hi Folks,I have this situation where a customer has this addressing.The customer has subnetted 192.168.1.0 network as follows.192.168.1.48/28 and 192.168.1.64/28.the problem is,now they want to match the IP range of 192.168.1.80 to 192.168.1.254 in a...

Attached is a Visio diagram. Router SA7B-MAN-R1 is the hub for three different locations. I have a sniffer that I would like to connect to the Cisco 7206VXR. Can I span my serial interfaces to a gig interface on the router? What are my options? I wou...

Hi, i am not sure, if its right place to put my Question, please assist.i am having issue in connecting my video polycom from outside world.my polycom is behind pix firewall 515-E IOS 7.2(2) in inside, having static nat on pix.static (inside,outside)...

Hi,I have a scenario(diagram attached) where different external vendors will be coming in and accessing our database via a secured mpls network. We will be using EIGRP between our head end and the remote vendor sites router with the same autonomous n...