Routing

I noticed by accident that some (not all) traffic is passing between my DMZ and LAN ports. I would have thought that a router would not forward traffic from one port to another w/o a rule specifically allowing this.What would be the rule I would want...

Hi all. I have a branch location that needs its employees to have the ability to create PPTP VPN connections to connect to public servers, etc. The 2610 router currently has a box to box vpn connection to HQ. How can I allow all LAN nodes to pass ...

Hi,I have a weird issue . . . On a router connected to a passport via an ATM card, I was seeing the link flapping, and I was able to see these flaps occuring while in the router and in the logs. After checking the interface, I was seeing increasing...

Hi,a vendor want to access my network remotley through a VNC, what is the process to grant him this access.thanks,

Can I use a public cert running on IIS Windows server, on the CSS SSL accelerator? Is this possible or I need a cert. to the CSS?ThanksZahi Zeineddine

My Catalyst 3750 switch has a long list of static IP routes, and I also run OSPF.How can i easily select a few of those static routes to be redistributed into my OSPF process ?Can this be done without using route-maps ?

HelloI seem to have a bit of a problem with my 7206VXR Router.I have a few customers (about 30 or so) behind the router on wifi, adsl and fibre.Now when I do a speed check against a reliable speedometer, or I download a file from my own computer (whi...

This threat seems to want me to turn off aggressive mode, does anyone know what this means:THREAT: IKE is used during Phase 1 and Phase 2 of establishing an IPSec connection. Phase 1 is where the two ISAKMP peers establish a secure, authenticated ...

Hi All ,My ospf router is showing that it is in INIT state & not forming FULL state , how should i fix the problem.

We have a few Cisco 837's working as L2L's. I have scanned them for vulnerabilities, and received this message, and need jelp to remove it:ICMP Timestamp Request:THREAT: ICMP (Internet Control and Error Message Protocol) is a protocol encapsulate...

Hello all,Can you help me to choose the good Cisco Router to do ISDN in Bahamas?Does I need Cisco 802 or 801 ? I think the switch type is Basic-ni but really don't sure. Is the NT1 is including with the Cisco 802 ?Many thank for your help.

We have 2 headoffices in the different cities.In each city we have connections to Providers collocation where we have Cisco7206.All 4 routers (Cisco7206) connected with each others via PLC.We have a very critical and high bandwith traffic between HO'...

Hi,Anybody knows the maximum interface speed of module WIC-2T ? It will be installed in HWIC slot of 3845 router.Where can I find this information ? (2, 4 or 8 Mbps)?TIA