Routing

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Webinar

 
Labels

Forum Posts

Hello,Is there a way of dynamically load balancing two links using BGP such that if one link goes down traffic is automatically routed on the other link?I am an administrator in an ISP. we have 2 links to two different internet bandwidth providers. O...

Hi,According to url below, ADSL2+ HWIC only supports on board in 38xx. Can anyone tell me if there is any network module that would support ADSL2+ HWIC? If not, any plan or roadmap for this support if you knowhttp://www.cisco.com/en/US/products/ps585...

risam by Level 1
  • 243 Views
  • 1 replies
  • 0 Helpful votes

hi all can some pls tell me the difference between interface mtu and ip mtu. the confusion i feel is when we set the physical mtu it going to affect the ip packets anyway right then why do we have the ip mtu option. can someone pls explain the differ...

Hello, I have I little problem.I have 2 adsl line with cisco 2811. I would like use one connection for server and vpns and the other for basic internet connection. But when I had the second ip route : "ip route 0.0.0.0 0.0.0.0 dialer 2". The connecti...

Hi All,I have a simple setup with 7 branch offices connected to an e1 controller at head office, as followscontroller E1 1/0 channel-group 0 timeslots 1 speed 64 channel-group 1 timeslots 3 speed 64 channel-group 2 timeslots 5 speed 64 channel-group ...

Resolved! 3845 solution

Hi,I will buy a Cisco 3845 router.=========================================Requirment : need 2 FastEthernet and 8 serial interface.I think I need to buy 2 x NM-2W, 4 x WIC-2T. 3845 has FREE two 10/100/1000 interface. Right?Please help to confirm it a...

I have a problem which I have seen on several post and also this article.http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094634.shtmlWhen I configure this as explained I am able to RDP from both external and vi...

Dear All, 12.1(8a)E i hv this IOS in my cisco boxes and i want to configure Password retry delay but commnad login block for is not supported can any body give me tell me the command ? is there any other way i can configure .Thanks & Regards,Cisc...

Greetings,I have a 1841 series router with the following IOS on it:Cisco IOS Software, 1841 Software (C1841-ADVIPSERVICESK9-M), Version 12.4(3d)From what I can tell, this IOS version requires DRAM (128)/ Min Flash (32)Thr router has the following mem...

IM-Design by Level 1
  • 396 Views
  • 1 replies
  • 0 Helpful votes

Hello,I have a 10 Mbit line with one of my customers. The problem is that he can onlyuse the half of the bandwidth. I'm usingMultilink PPP to join the five 2 Mbit (1984) E1s. What can be te problem?Here is the show commands from my side:Multilink2, b...

horvaia by Level 1
  • 1353 Views
  • 20 replies
  • 0 Helpful votes
Review Cisco Networking for a $25 gift card