Routing

I need a sample configuration for connecting a 871 to a cable modem. I am using DHCP on the WAN port but can not get internet connectivity from the LAN ports.

Hello I have configured the bandwidth percent remaining command on my network i was wondering if there is a way to test it. Or if anyone spots if i made a mistake. below is the config IP's changed!class-map match-all 25vlan match access-group 106clas...

ip route dest ip dest mask next hop(gateway)The next hop should always be from reference to the source on which this route is configured or it can be the next hop with reference to the dest i.e., next hop from dest.

My carrier has their own CSU/DSU. Is there a way to disable the internal CSU/DSU on a VWIC-2MFT-T1 so that I can use the ports to connect to the external CSU/DSU?

Dear Friends, We have one 3745 now and Internet on T1 is working.. One more router we have procured that will be having one more T1 connected...now 3745 IBW will be dedicated for Proxy users and new router will be for one Webserver on my DMZ.....

HiI have already configured a 7200 with this options:1.Cisco 7204 VXR2.NPE-G23.PA-MC-8TE1+But it is a problem with NPE-G2.Would you Please send me a good technical document about it.

Heres the situation,I am trying to PING one of the loopback interfaces (bieng used as a RP) and I am dropping aroung 60% of packets. Ping from the other site to this RP are excellent as well as the other interfaces of the router on which RP loopback ...

Dear Professional,I want to test my configured call manager and 4 ip phones in my test lab environment.I have a Catalyst 2950 switch with 24 ports ONLY available in my lab.How can I utilize my 2950 to access to my call manager and ip phones. I config...

I purchased a used 804 router and it appears it has not been reset to the default config and I do not have the credentials to login to the router. In my terminal session, when I connect, I am prompted for my login credentials and I can not get to a p...

I have a 1720 router with a 4 port Ethernet switch in one of the modules and the router does not recognize it. The LED for the module comes on and states WIC 1 OK, but the router does not recognize it. I upgraded the IOS on it to the latest. Doesn't ...