Routing

Q:- If you have configured route redistribution between separate routing domains and have included route filters to prevent route feedback, which command would you use on a boundary router to verify that redistribution is working correctly? A. show i...

Scalability is achieved by _____. A. NET assignmentB. route summarizationC. controlling ES-ISD. limiting IS-IS resynchronization issuesOne more question is there...Routing from 49.BAD1.1921.6800.0111.00 to 49.BAD7.1921.6800.0112.00 takes place at whi...

Dear All,I have cisco 3745 router which is connected to two different Ehterner switch with two LAN ports. I want to configure Eth 1 interface of the router as a backup for Eth 0 interface so that once the Eth 0 get down the Eth 1 gets the IP of ethe ...

How many routing updates can EIGRP send before it expects an acknowledgment? A. oneB. threeC. fourD. depends on the speed of the linkThanks Mahi

Hi guys,i want to implement some traffic limiting scheme as conclusion to my previous posted topic. I just want to clear things up which is more desirable to use, policing or shaping? I found out that policing drops packets unlike shaping. So which d...

Q:- Policy-based routing on a Cisco router _____. A. uses extended IP access lists to define which interface the router should send packets outB. is applied to incoming packetsC. uses standard IP access lists to define which interface the router shou...

Which two OSPF features are specific to Cisco? (Choose 2) A. stub areas B. totally stubby areas C. NSSA D. totally stubby NSSA E. multicast updates RegardsMahi

We have a Cisco 2950 managable switch. It's sitting between our ISP router and our own firewall. It's configured with its own private IP network. We want to be able to manage it from behind our firewall. Is this possible? Please show me the direction...

Hi All I've a site connected to the H.Q.i just need to implement a Redundancy Link to H.Q.Trough Route-Map(Primary Link it will be Wirless Link;The second it wil be Leased line)so PLS Can any list the config of the router(2620S) in the Site + The rou...

guyz, i was wondering what is the difference betweem ENTERPRISE & Enterprise IOS ?

Hi, I am not sure if this is the right place for this post. I have a 2651XM router acting as a gateway, today the router hang due to the following error: bad channel id - dsp_pack->channel_id = 200 from PA 0 dsp 5 Does anybody know what the abo...

Can I ask you about configuration of the Cisco router?I have a PLDT DSL modem connected to a LInksys DSL Router.This is working properly and can share internet to all workstations.We purchased Cisco 2811 Router which has only 2 FastEthernet adapter.I...

I am thinking of using the 871W for the following application and wanted a confirmation that it works on the 871W.My client has two wireless Mac laptops that he wants on one network and two wired PCs that he wants on a separate network. For security...

{Internet}Gateway(192.168.1.1)-----(192.168.1.200)RIProuter 1(147.200.200.1)-----(147.200.200.2)RIProuter2RIProuter1 is set with the default-information originate commandCan anybody explain me why, my RIProuter1 is redistributing correctly the defaul...

What are Offset lists and distribute lists used for? And how are they different from each other?