able to ssh switch 2 from pc 2 but not able to ssh switch 3. can anyone tell me what configuration is needed in switch 3 so that i will able to ssh from pc 2 to switch 3.
Forum Posts
Resolved! Which Cisco router to buy?
Hello I am really new here and I only own a small Gbit switch so please forgive me for potentially sounding like a neophyte. So a few days ago a fiber optic, Gigabit network connection was added to the house and with that a HALNY HL-4GQVS router was ...
Hi everyone,We are a public school and we have had this problem for a long time now. Following is the topology:ISP -> Firewall(ip:192.168.2.252) -> Core Layer3 Switch(ip:192.168.2.251)Core Layer 3 Switch is connected to WLC(ip:192.168.2.8) and 2951 R...
Hi guys, what things do I need to enable WAAS? I have 5 ISR 4000-series and licenses APPXK9. I need an OVA file and that's it, or something else to configure WAAS on routers? And how to enable virtual Central Manager to manage WAAS (vWAAS it same?).
Dear all, I want to advertise 2/25 to our upstream providers Both have different ASN. I How can i set BGP attributes so that I can advertise 0/25 for one ISP and 128/25 for other ISP. Please note that our ISP advertise /24 rather than/25 to t...
Hi guys. I have hub router Cisco ISR-4431 with DMVPN IPsec, and site-to-site vpn's. And i want enable WAAS. It's possible? DMVPN, and site-to-site vpn's still work?Ty for answer.
Hi Guys!Let me share my experience.I've got C3750E with few VLANs. 1 VLAN for wifi clients an cisco standalone AP (no WLC in use), and 1 VLAN for wired clients.I struggled to set up chromecast for a year, I didn't find a good example until last night...
Hello Community,we have 2 cisco 9500-32QC and have stackwise-vitual. all of them have smart account license scheme. In the next output you can see that Switch-acitve licenses are in AUTHORIZED mode and Switch-stanby licenses are in EVALUATION mode:Sw...
I have a Cisco ISR with a massive ACL. Right now have device A (at 204.77.x.n) unreachable outside of its own subnet (say 204.77.x.n/16), but I would like to reach device A from an outside subnet (say 10.10.10.1/24). How could I accomplish this? Here...
I am deploying Cisco ISR 4300 Series IOS XE Universal which shall embed some IP SLA feature from the web information.I would like to ask what feature are include for Cisco ISR 4300 Series IOS XE Universal without equip APP license?Thanks for the supp...
Hi I wonder if someone can help meI ran traceroute command and on the output I got something like this: 9 mynet.net (104.44.13.21) 87.284 ms mynet2.net (104.44.14.2) 96.702 ms 92.981 ms10 104.44.12.34 85.9ms 96.702 ms 91.91 ms in hop 9 looks like t...
I'm currently working on an EIGRP network and was wondering how to measure metric values, appreciate any help; thank you.
I'm trying to determine if advance enterprise license/image is need to run specific commands on an ASR 1001-HX. I know cisco use to provide a tool to check this does that still exist and if so where can I find it? Some of config features we need to r...
Resolved! 1 router, 2 ISP's running BGP. How to prefer one received default route from ISP over the other?
I have an ASR 1000. 2 ISP's and gettign partial routes from each. Also, gettign default routes from each. OF course the one I prefer is never the populated default route unless I shut the BGP session down to the other ISP. So this proves I am gettign...
