I have a question about route redistribution from OMP to BGP. It appears that routes redistributed from OMP to BGP have their metric set to 1000 and local-pref set to 50. bgp routes-table vpn 201 10.100.106.0/24info 0nexthop 0.0.0.0metric 1000local...
Forum Posts
Hi Sir,I am Beginner for SD-WAN, I want to learn and practice on this, Please, give pdf file and video clip to learn and practice. Thanks & RegardsDhananjay Kumar9899232293
Hi Please see the first below picture. I am trying to see DPI Aplication traffic flow after sending a big ping packet from device behind the vEdge, but it shows "No data to desplay". Did I miss some step? The second picture show some flow that I want...
Resolved! R1 cannot see one route over SDW
Hi We have the below topology where ospf are configured at all devices. vEdge1 can see route 2.2.2.2, but R1 cannot see it. Is this normal? Can we let R1 see 2.2.2.2? Thank you 1.1.1.1-R1 ----vEdge1-----vSmart-----vEdge2-----R2-2.2.2.2
Hi Community, I have a topology where we have two Cisco IOS-XE SDWAN, in active/active mode.This SDWAN routers has ZBFW feature enabled, and all firewall rules are in inspect mode.The LAN interfaces of Both SDWAN Routers are connected to the same COR...
Hi all, I have Cisco ISR 1100-6G router and unable to access usb thumbdrive which has 1GB capacity with FAT format. Able to see it in file listing 'lsblk' and auto mount to /run/media/sda. But when access , it gave deny permission issue. Is there any...
Hi i have question regarding SD-WAN design, for the HQ router showing below in the picture should it be working as normal routers to connect the sites or have to be vEdge VPN0/VPN512 consideration the HQ right now is only connecting to other sites ...
Hello Everyone , Recently I have upgraded my Vmanage to version 2.6 for testing purposes. After the successful upgrade , I tried to login to Vmanage GUI with user "admin" , the system prompt me to change the admin password. As requested , I entered ...
I have a Cisco SD-WAN topology running version 20.3.2. Everything works fine, but the 'Monitor > Network' section isn't working reliably anymore for the past few days. Under the Monitor section for a selected vEdge device, if I go to WAN > TLOC (or ...
Hi!Who can explain me what is the meaning of column of "VS/VM" in cisco SD-WAN when one performs command "show sdwan control local-properties" and look at the table with tunnel interfaces.Screenshot is attacedAny ideas?
Hello Community! It is supported in Cisco SDWAN ISRv? I have completed the configuration by cisco guide. The only strange thing is where it says (No interfaces configured) Devices (0)
Resolved! omp peer cannot be seen
Hi Three vedges are fully connected and can ping each other. Device template are attached to each vedges successfully. But peer can not be seen. Please see the below. Anyone can share some experience or some suggestion? Thank you!
Hello Community! I have some cEdge ISRv with version 17.03.03, But I need to download the package for UTD features, but it is not in this version. In previews version if there are. Example. 17.02.03 17.2.3 What do you recommend me?
Resolved! Out of Sync when attaching template
Hi Please see the below screenshot. After attaching device template, it shows out of Sync. Looks like template configuration and original one are different, and finally roll back. So what can cause the the issue? Thank you
Hi, We have cEdge-1 with color biz-internet behind a internet router with PAT. This cEdge is configured with max-control-connections 0 & no vbond-as-stun-server. From reading online, these config are needed for the other cEdges to discover cEdge-1 ...
