Small Business Support Knowledge Base

RV082 DHCP Server

Dear,We need you help of the network layout below.equipment-------------------------------------------RV082 x 4 pcsAt the network connectivity, each RV082 have one broadband connection and DHCP server enabled and the router ip within the same subnet ...

Wireless 4410N AP as Repeater and using Switchport (SOLVED)

Hi,Have the following scenario2 WAP4410NOne is connected to a POE Switch and does WPA2 PrivateRuns very nice2nd is somewhere where not Etherne Cable is, but devices which should haveaccess to the WEB, they are connected to a 5 Port Switch, the switch...

Now Available - CCA 3.0(1)

The Cisco Configuration Assistant( CCA) team is pleased to announce the availability of the latest release - CCA version 3.0(1), a maintenance release focused on quality improvements. CCA is an easy to use interface for managing platforms within the ...

SPA5xxG SPCP Russian UserGuide

Руководство пользователя для телефонов серии Cisco SPA5xx(SPCP).

Dashboard Image

UC320 At a glance (French Canada)

UC320 Datasheet (French Canada)

WAP200E Firmware Update

WAP200E firmware version 2.0.2.1 now available in the Cisco Download Center.Download firmwareRelease notes

Configuring Call Park with Broadsoft

This document provides a short overview on what needs to be done in order to get call park working in a short period of time.The document also gives you step-by-step details in case you have never before configured call park on a SPA IP phone and Bro...

SPA525G XML dictionaries v7.4.5-6

Attached XML dictionaries for SPA525G IP Phone, version 7.4.x (last version is 7.4.6)- Danish (dk) - New- English (en)- French (fr)- German (de)- Italian (it)- Dutch (nl)- Norwegian (no) - New- Portuguese (pt) - New- Russian (ru) - New- Spanish (es)-...

UC300 series is here!

We are glad to announce the availability of the Cisco Unified Communications 300 series, UC300 series, model UC320W.The Cisco Unified Communications 300 Series gives you and your customers an entry point to collaboration with a complete voice and da...

Troubleshooting: SPA525G2 "Upgrade failed: upgrade to less than rev not allowed" or "Upgrade failed: upgrade not allowed, version constraint"

When upgrading a SPA525G2 from older firmware such as 7.4.4 or 7.5.x [yes, 7.5.x is older than 7.4.6 firmware] to 7.4.6 the upgrade may fail and you may notice messages similar to the following in syslog output [if you enabled debug or syslog]"SPA525...