Hi all,I’m working on SPAN configuration on the device Cisco C1000-48T-4G-Land i am trying to filtering unnecessary VLANS/traffics in my destination monitoring interface.I looked through the data sheet and configuration commands, the switch does not ...
Forum Posts
Hi guys eventually i configured Inter-VLAN using layer 3 switch but I seem to not be able to find the issue why my pcs is able to ping to the ISP router but not outside of the network (Internet). I am just a beginner and don't really know how to trou...
I am having a problem getting DHCP on my PC LANRouter (DHCP Server) (ISR4331)(192.168.70.1)-- Switch (3750G) (IP helper address 192.168.70.1 on Vlan 1) - PC (192.168.70.x)The port coming from router (DHCP server) is connected to G1/0/1 Catalyst 3750G...
I'm setting up a network (see image) and the issue I'm having is that I can see the redistributed routes in the routing table of R1 and R5, but I can't ping to them. When I try to ping 2.2.20.2 (R2) from R5 it's doesn't work, I can ping from R4. Sa...
Hi Guys n Gals,I am having a bit of trouble with an assignment I am doing in packet tracer.I don't have the files handy until the eve, so will send pics/files later if required.My problem is that I have an access router connected to 3 separate cluste...
Trying to authenticate I have this error as shown, can anyone help me!*May 11 12:38:20.482: %RADIUS-4-RADIUS_DEAD: RADIUS server 192.168.100.3:1812,18 13 is not responding.*May 11 12:38:20.482: %RADIUS-4-RADIUS_ALIVE: RADIUS server 192.168.100.3:1812...
Trying to authenticate I have this error as shown, can anyone help me!*May 11 12:38:20.482: %RADIUS-4-RADIUS_DEAD: RADIUS server 192.168.100.3:1812,18 13 is not responding.*May 11 12:38:20.482: %RADIUS-4-RADIUS_ALIVE: RADIUS server 192.168.100.3:1812...
Hi.I'm a student and an admin of a network around 200 computers.Our network have a cisco router 2901 that have configured a NAT and a DHCP services.Monitoring with PRTG we have notice that sometimes the CPU usage of our router reaches close to 100% u...
ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)Router uptime is 1 minuteSystem returned to ROM by error - a Software forced crash, PC 0x30EEBBE8 at 06:3 9:57 UTC Wed May 8 2024System image file is "flash0:c2900-universalk9-mz.SPA.1...
Hello, I am trying to set a router-id and then clear ip ospf process as required, but and Invalid input error appears instead. Please help, Thank you in advance!!
Resolved! DHCP loging
Hello,I have configured DHCP server on Cisco 881. My customer like to know his IP address/MAC address.Is it possible to send some log of IP/MAC address to his server? Thanks Milan
we observed a discrepancy in version representation between the version number provided in security advisory and the output of the "show version" command. Specifically, version “03.14.02s” appeared as “03.14.02.s” after executing the command, leading...
Hello guys, I have some problems with my laptop when using Cisco Packet Tracer. The first time i had worked on it to do my project, it still worked properly. But in the second time, it had some problems like some lags... I brought it to service store...
Resolved! Catalyst 9500-16X
Hello everyone,I am a student, and for a paper i am doing i was wondering if Catalyst 9500-16X was able to do VPN IPSEC as a client, connecting to a cloud VPN IPSEC server. The use case is a Collapse Core topology and i would use 2 C9500-16X as the c...
Resolved! Trunk commands for ISR ESM?
Hello,At my home, I had an 8 port 2960G switch die after a power outage today. I replaced it with a ISR 1921 that has an 8 port ESM. It's been a very long time since I messed with configuring ESMs... My plan was to just copy over all of the switch...
