Resolved! IP overlapping
I am trying to configure this, however, once I get to g0/0.20 and try to set up the IP address it tells me that 172.17.18.0 overlaps with g0/0.10 . What should I do?
Forum Posts
Resolved! SW-4507R+E boot issue
Hey everybody...When I switch on the device it links to rom monitor. however after writing command "boot" it goes to cli.I tried few step to solve the problem in order to directly links to cli only.I did some steps here are outputs:rommon 2 >setPS1=r...
I have a 4507 running IOS v12.2.18.I'm trying to change 17 slot 5 10/100 ports to 10Mb.I'm in global config and type this command:"interface range Fa5/1 -17"This exact syntax in it the documentation. But, this command puts a ^ under the "1" in 17. ...
Resolved! Trunking issue
So here im trying to configure VLAN so that i can ping pc-a to pc-b, pc-c to pc-b, pc-a to pc-d, etc. I made 4 vlans (10,20,30,40), and assigned vlan 10 and vlan 20 to S1 (vlan 10 to pc-a, vlan 20 to pc-b), and vlan 30 and vlan 40 to s2 (vlan 30 to p...
We need some assistance here. So we have a Cisco C9200L-48P-4X switch and I've enabled the ip http secure-server on the switch and I get the following error when I try to browse to the gui interface.Secure Connection FailedAn error occurred during a ...
Hi everyone， I want to monitor the catalyst4500(including C4507 and C4500X) CPU,Memory,FAN,Power supply status by snmp in VSS mode. Could you help me provide the useful oid for these:1\CPU:2\Memory:3\FAN:4\Power Supply: Thanks
show int status shows:Gi1/0/14 notconnect 1 auto auto 10/100/1000BaseTX But show run show:#show run int gi1/0/14Building configuration...Current configuration : 134 bytes!interface GigabitEthernet1/0/14switchport trunk native vlan 10switchport trunk ...
Dear All, we have 9 POE Yealink phones connected to the switch: do you you think is worth/possible/not possible to add them all into a LAG?Thanks
Hello guys, I got a problem with my architecture. I'm totally new to this and I need a little help. Could you help me out with the router 1 please? I'm trying to configure a DHCP on the network 192.168.5.0. Thank you in advance
I have an existing network consisting of several Cisco Catalyst 9200L switches in a stack that are using multiple VLANs. I am not the person who manages the configuration of those switches, but for these purposes, I am attempting to get a copy of the...
MY CISCO WS3750X 48 PORT 1G POE NETWORK SWITCH IS NOT POWERING ON SERIAL NUMBER xxx INVOICE PURCHASE DATE 2ND SEPT-2023 VENDOR: xxx xxx PLEASE LOG THE CALL AND GIVE SERVICE TICKET
Hello comunity,I have problem witch Cisco serial console on awitch 9200L. I am connecting from Debian 12 with gnome. When I login to cisco via serial console with usb-serial reduction, the console start automatically entering this charecter "@" like ...
Resolved! Determine SFP-Type ASR920
Helllo,From the 'show inventory' command on a ASR920-112-CZ-A I get the follwing response:NAME: "Chassis", DESCR: "Cisco ASR920 Series - 12GE and 2-10GE - AC model"PID: ASR-920-12CZ-A , VID: V05 , SN:NAME: " FIXED IM subslot 0/0", DESCR: "FIXED : 12-...
Hi all,After successfully moving two C9300 stacked switches without powering them off or affecting the network... we had a power event which forced them off Anyway, they powered back up ok and everything is running except a strange issue with the 10g...
Hello Team,We would want to know if the below devices of CISCO have the feature of generating net flow and dataflow.Do these these devices do generate data and netflows ??? CISCO CBS350-48P-4G-UKCISCO C92001-48P-4G-ECISCO C93001 4X10GKindly confirm.B...
| User | Count |
|---|---|
| 10 | |
| 7 | |
| 7 | |
| 5 | |
| 5 |
