Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Get 20% off switches when you combine Cisco solutions

 
Labels

Forum Posts

Serial0/0/1 is down, line protocol is down  Hardware is GT96K Serial in async mode  Description: ** MODBUS data From BR-A **  MTU 1500 bytes, BW 9 Kbit, DLY 100000 usec,     reliability 255/255, txload 1/255, rxload 1/255  Encapsulation SLIP, loopbac...

Hello,I'm trying to configure some switching here. I have 2900 Router(ios ver 15.0) and put SM Module in that router. I would like to know how to configure that Module to work as a switch? Very Much appreciate your help!Sincerely,Andrew

Andrewkai by Level 1
  • 5109 Views
  • 4 replies
  • 0 Helpful votes

I have a 3845.When I do a "show inventory" i see:Admin-3845#show inventoryNAME: "3845 chassis", DESCR: "3845 chassis"PID: CISCO3845         , VID: V01 , SN: FTX12NAME: "c3845 Motherboard with Gigabit Ethernet on Slot 0", DESCR: "c3845 Motherboard wit...

Has anyone ever seen OSPF automatically change an area on a network argument especially when that area does not exist in the network?Oddly enough I checked online and one Area 64 is related to AA.Do you think whoever designed this protocol was trying...

1.When I install one line card with switch fabric is connect to supervisor engine using CEF ( e.g. WS-X6516A-GBIC ), i want to know the 32Gbps share bus  is work together or don't work at all? total 8Gbps switch fabric channels + 32Gbps (share bus)?2...

Resolved! Virtual Switching

Hi,  I have Cisco Cat 6509 with Supervisor Engine (WS-SUP720-3BXL) and IOS (12.2(33)SXH2a), I would like to know is it support Virtual Switching if yes is it stable.Thanks.

ashrafi73 by Level 1
  • 773 Views
  • 5 replies
  • 0 Helpful votes

ForumI am working at a client site today.  We have an old switch that we are trying to set up for a new techie.  I wanted to do password recovery on the box, but I hold down the mode button, watch the port 1 led come on.  It should then be in rommon ...

Hi AllLooking for some guidance on restricting bandwidth on a per vlan basis on either 3750 or 3560 switch.We are soon going to have 8 vlans that are Layer 2 only and different contractors connected to each vlan.From the switch we will have an uplink...

r.robins by Level 1
  • 581 Views
  • 1 replies
  • 0 Helpful votes

Hi,I  have a cisco router configured as a terminal server. The router has an async module. I can telnet to the router by using the async port number (say 2065)instead of port 23 and ther router redirects me out line 65 and I have a connection. I can ...

HI ALL ,              I have 2 user distribution switch (UD1, UD2) , 6 user access of 3550 (Sw1,Sw2,Sw3,Sw4,Sw5,Sw6) , my total End user count is 280 nos , connectvity between two UD switch is L3 links ,All user access switch uplinks are connected to...

Review Cisco Networking for a $25 gift card