Switching

Hi allI am looking to load balance outgoing internet access over a T1 and a Cable Modem Internet link; which Cisco router you recommend me that include wireless access, plus firewall and site to site vpn

Hi all, can anyone tell me what the input and output queue are on an interface? i gather these are only used when there is congestion ? please advise

Anyone ever seen this or have ny input on this error.... Error is at the bottom on line starting with the number 2Router#sh powersystem power redundancy mode = redundantsystem power redundancy operationally = non-redundantsystem power total = 137...

hi,What is the difference between syslog and snmp traps.Is 'logging host' command used for both syslog and snmp traps.

I have A,B,C IP'Sin a vlan.I want to block communication between A and B,C only .Is it possibel.As A is firewall and B,C are ISA servers.I found that while communication B and C my firewall A gets 100% utilized.Communication is passing through firewa...

Hi. I've been trying to find an snmp server that would allow me to query snmp enable cisco devices for their cpu and ram utilization. These stats would then be saved by the snmp manager. However, after spending hours trying out many, i discovered ...

Based in the UK (SoHo business) I need to manage 2 computers (A = Vista Business, dual monitor; B client = Win7 RC, single monitor).The Linksys Pro Connect KVM switch looks ideal, but I need to know if this is DV-I compatible, or if I need an alterna...

Problem:I Can Ping the internet (yahoo.com) From Outside(WAN) Cisco 2821 Interface But Not Inside Interface(LAN).Setup:I currnetly have a linksys RV082(192.168.0.1) connected to two ISP's. Connected to one of the switch ports on the RV082 is a Cisco...

Hi,I'm looking for suggestions on breaking up a flat network. My current infrastructure is as follows:192.168.0.0/23 (LAN)150 Server IPs (approx)75 Appliance IPs (switches/router/fw/printers)240 Workstation IPs (90% dhcp)As you can tell above this d...

Hi Experts,How can I configure router to send enable trap ChassisAlarmOn?Thanks and Regards,Yi Shyuan

Hi. We have a Switch Catalyst 3560 as the hub of our net One of its ports is connected to a Gateway, that we don't administer. When we connect a new computer to the switch, there is times that you can connect to this equipment from outside until that...

Hi guys, we have a new datalink to a branch site. Configuration:Branch router - 111.22.254.102HQ Gatewateay - 30.30.254.102CCM1 - 11.11.11.1CCM2 - 11.11.11.2Branch office router acts as the remote gateway.3750 Core switch at HQ acts as the HQ Gateway...