Switching

Hi all These is a silly question but pls give the information about ip virtual-reassembly and encapsulation ppp ,why we use that and if not use what happened ? pls...

Hello, I have a L2 scenerio on cisco switches 4507 like.RAS Router-->Cisco 4507 Switch A(Trunk Port)--->Cisco 4507 Switch A(trunk port) with another 4507 switch B---> Access Port on 4507 Switch B (from where one IP DSLAM connected). Problem is tha...

Hii have cisco 2851 wan router connected to 2 differnt cisco 3560 switches.The 2 on board Gig interfaces are part of BVI interface and ip has been given to BVI interface.Both cisco 3560 swicthes connected to each other on fa0/24.Gi 0/1 of both switch...

okay,call me stupid, I'm fine with that. My xbox 360 has recently informed me that in order to connect to xbox live my router, needs to be running a minimum MTU setting of 1364,unfortunately for me, its a friends router and i cant seem to find out th...

Dear All,I am trying to install 2 additional HWICs ( 2*FE) in a 2811 router but it is not detecting these interfaces. I am getting following message in logs,"GT96K_FEWAN-1-UNKNOWN_WIC: NM slot 0, wic card has an unknown id 53A"What could be the possi...

Hi,We have two 10GB links using the Cisco 10GB LR x2 gbics in a 8 port 10GE card (WS-X6708-10GE), one which is showing high optical loss, while the other is fine. gw-01#show int transceiverTransceiver monitoring is disabled for all interfaces.If dev...

Hi;We've got two 6500 series switches with WS-X6066-SLB-S-K9 module.We want to implement load-balancing mechanism between modules on switches.Which method have to be used ? HSRP or GLBP ?Thanks.

I'm traying to setup two simple vlans on the cisco 3548 XL. They both will connect to a cisco 2600. At this moment, I have been succesful creating the two vlans in the cisco 3548 xl and created two entries on the cisco 2600 fa0/0.1 and fa0/0.2. Howev...

I have several local usernames and passwords set up on a 3750 switch and I use these usernames/passwords to access the switch when I access it via Telnet/SSH. However, when I console into the switch there is no authentication. I'd like to use the sam...

Hello,I cannot seem to find any information or configuration examples of using a Cisco IOS DHCP server to update A records on a local dns server.I would like to have the router that is running dhcp update the records for a few windows workstation to ...

End-of-Life Milestones and Dates for the Cisco Catalyst 3560 IOS Advanced IP Services Feature SetI can't seem to find what the EOD life is for 3560I have WS-C3560-24TS-S 12.2(37)SE1and WS-C3560-24TS-E c3560-advipservicesk9-mz.122-25.SEB3

Hello all,I have a question regarding the combination of etherchannel and stp.My goal is to have four 3560G Switches connected in a ring, with 2GBit/s links between the neighbouring switches. I have connected the switches by channeling two 1GBit/s li...