Switching

On my MDS 9513 MGMT0 interface i cannot ping anything apart from my own IP address. I cant even ping anything on my own subnet.The interface connection is showing as up up and is not displaying any errors and does not have a speed/duplex mismatch. c...

What does "no ip dhcp use vrf connected" command do? Is it a must to include this with every dhcp pool commands??I removed it and my clients were not getting DHCP IP address.Thanks

Hello,How can I disable http server on a 9100 switch? I see command options for ssh and telnet server but none for http server. Thanks.

guys if we have four switches two of them are 3550 and two of them are 3560.....no wif we want to do load balance on mac address in 3550 it can do only src-mac address or des-mac address in 3560 it can do src-dst-mac.....now if we want to do it on ip...

we if want to prune do we alwasy config on server (switch which is server) or we do on all switches (client and tranparent)as well??? thanks

Dears ,I want to upgrade my CSS11503 .Currently I'm using the version 08.10.1.06 . I want to upgrade it .From where I can download the image RegardsHaris

Happy Holidays Everyone.I have been reading some posts on the forum about WoL packets traversing a LAN to wake up specific IP's. Basically, as I understand it, I need to add the following to a config for it to work:ip forward-protocol <udp-port used ...

Hi I have a switch 6509 with 2 SUP 720B at slot 5&6. Is this work as a redundant only? If i need both sup engine to be work together for load balancing, is it possible? if yes how can we achieve that?regards

What is the maximum bandwidth can pass through fastethernet 100 Mb switchport on cisco 3500 switches?

Hi,I am planning to implement have a collapsed core architecture with two core switch connected to two asa firewall. Can somebody guide me on the High availibility options that i have. Can i have two links connecting to a single asa firewall originat...

We have 2 sites, both with Cisco 877 devices. On both sites, there have been powercuts in the past.The problem is, to recover the devices from a powercut, we need to be physically consoled in to them! Strange eh?When switching them off and on normall...