Switching

HELP I'm a ccna student!!1.What is exactly a native VLAN & what scenarios does it get applied in; in context of IEEE 802.1Q. Whats its function?2.what does the output "SHOW INT TRUNK" show; when VLAN Trunking Protocol pruned?3.as a ccna i'm expctd t...

In a web hosting environment, as there any benefits to enabling jumbo frames in the core?

Remote site connected to Head Office over MPLS Link (Primary)Remote site connected to Head Office over DSL/VPN to ASA5520 (Backup)Remote router: Cisco 2821Exchange Server: Win 2003 Problem:When MPLS link on remote router (2821) drops and the DSL/VPN ...

Are there any disadvantages of using GLBP over HSRP. Presently we use HSRP in our core switches but I would like to load-balance the vlan usage across each switch core more effectivley using GLBP.

Hi Our organization is asked to deploy a SFT design based on 6509 switches .Cna some one share the configuration for switches on the basis of best practises followed by cisco

is there any way I can change this to my name "Compiled Tue 24-Jun-97 12:22 by "someone"I need to change "someone" to my name Thanks

I am able to get Internet for the Internal host which i have natted,Connectivity is like , Host-6513-Checkpoint-InternetRouter but i am not able to ping Public Ip 218.248.6.x ,which i have natted to private host 10.196.212.x .how can u check whethe...

Dear sir,i have a isdn bri backup line for my leased line,to check whether the backup is working or not, I removed the backup bri isdn from the router and for a few minutes the bri is working after the router gets hanging, then automatically reboots,...

It has been a while since I have configured a Cisco Router, Firewall, etc. I'm revisiting some old issues which may have changed since then.- In an environment with two or more AS's (Autonomous System), what routing protocol (e.g. RIP) do you use bet...

How reliable is the tdr test? I just tested several locations and they are all bad? Shouldnt I have NORMALS on all test results?See attached...

Hi,Is there any way to run HSRP between two different platform of Catalyst switches.(3750 & 4500).I have one 4503 as core switch I want to have atleast some kind of redundancy at core level as I have one extra 3750G in my stock so I want to use it fo...

Hi, Is there any entry available to shutdown Cat 6500 chassis.

Is there a way where we can clear hung telnet sessions without logging in to device?

Is it possible to send broadcast from one vlan to another?

I'm trying to modify incoming EIGRP metrics for a few networks. Below is a snippet from the config and the partial results of a "sh ip route"!router eigrp 1 passive-interface default no passive-interface Vlan1 no passive-interface GigabitEthernet1/0/...