Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, November 4, 2024 through Friday, November 15, 2024. Our colleagues Rohit Chopra, Vaibhav Aggarwal, Anuraag Majumdar, Saquib Zeya...
Forum Posts
I have attached my config file. I am tring to setup vpn to be used on remote pc and connect to router. I am not sure what I did wrong on the setup. Any and all help would be appreciated.This is the first step of many I have to embark on, I am tak...
Hello!i have this version of switch:Switch#sh verCisco Internetwork Operating System Software IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)XU, RELEASE SOFTWARE (fc1)Copyright (c) 1986-2000 by cisco Systems, Inc.Compiled Mon 03-Apr-00 1...
Hi Experts,Just going through my new CCNp switching book, and i see a tip that says that support for ISL has ceased accross all Cisco Catalyst platforms.Would anyone like to confirm this?RegardsStephen
We have 6500 with IOS version "c6sup22-jsv-mz.121-26.E8.bin". 6500 has one 8-port GBIC blade and a few 48-port GE-TX blades.On GBIC port "switchport trunk encapsulation dot1q/isl" can be configured. But on GE-TX, there is no command opiton for that.H...
Hi i am working at a site with 4 1230 aironet access points & 1 ce 500 switch , there is no encryption / no authentication configured , all the devices are in the same vlan , the client devices are able to get the dhcp addresses & they get registered...
Resolved! Newbie Switching Question
I am trying to hook up a Cisco 2950 Catalyst switch. I have run cat5e straight-through from the router to the switch. I toned and tested the cabling. It is working fine. However, when I plug it into the switch, the server can't see the network. ...
Hi,I am sending to ask about the ISR security bundles which is more expensive than the regualar software. So, If I want to implement mainly the firewall features plus NATing on my ISR router, I know that the regular router software can do it, but wha...
I've setup a 1721 on an adsl connection. Everything works ok except the local dhcp server. Its setup as per all the proper cisco documentation but for some reason it just will not serve addresses to client pc's.Ive ran a dhcp debug and tried an ipcon...
I have three vlans on a 3750: 50, 51, and 52. I currently have ip routing enabled and all traffic is routing between the three vlans okay, but now I want to limit traffic to vlan 50 (use 50 as the management vlan and 51 and 52 for access vlans). do...
Resolved! vlan
hi allFor example I want configure vlan 16 to 5-ports at a time in cisco 2950 if its possible give proper command.
Hi,the following error message i get with the working ASA & also tried on a newly bought ASA.i tried issuing "ciscoasa(config)# nat (inside) 0 access-list cbaynonat", the command accepts then added "access-list cbaynonat extended permit tcp host 172....
Hi I have configured Cisco Switch to do 802.1x authentication of Symantec NAC Agents. I am expecting Dynamic VLAN Switching when the authentication passes or fails.Switch = 192.168.0.124Symantec Radius Server = 192.168.0.56Client MAC = 00-0F-1F-BD-B7...
Hi.I have cisco 2611 and 2 NIC cards.Also i have 2 ISP.How i can use this ISP for backup route ?Sample:ip route 0.0.0.0 ISP1ip route 0.0.0.0 ISP2Sorry for my english.
Resolved! CISCO-DHCP-SNOOPING-MIB on Catalyst 3750
it ist not possible poll the DHCP snooping MIB to get the DHCP snooping bindings on a cat3750 (answer: No Such Object available on this agent at this OID). Why ? Any other OID available on the cat3750 to get the snooping-bindings via SNMP ?
Hi all,Is there any way of changing the Administrative Distance for a Directly Connected route?I have tried this, but not working:interface Ethernet0/0 ip address 10.9.1.100 255.255.255.0 interface FastEthernet0/0 ip address 172.20.254.254 255.255.0...
