Switching

Hi all, is this for novell networks, and can I route between a novell network and a normal ip network ?

Hi all, can anyone give me an example of this layout that i would use ?

Can anyone tell me if I had a dns server at home, with my own domain name, How would I get other people to see my domain, If my dns server is publically accessable how do I get other people to know about it ? cheers

Hi Guys,I have done shaping before on the Cat 6500 and this can be done simply enough in class maps. Ok.Now I want to do the same on a 4500. Cannot do this in a class map. Must be done on the queues on each interface. Am I right in thinking that i...

Hi,I`ve a problem with the configuration of privilege levels on the Cat3550. I want configure the command "interface range fastethernet 0/1 - 48" for specific privilege level. I?ve configure the command#privilege configure level 5 interface rangeThe ...

Long story short, I have just started at a new company and I am trying to clean up the switch/router config's. Now the thing is in all of the Catalyst 6509's and 4006's port channels are configured for almost every single port on the switch's, not ju...

Hi all.I was trying to connect our two new 4503 switches to each other via port g1/1-12 on the supervisor modul..Mod Ports Card Type Model Serial No.---+-----+--------------------------------------+----------...

Hi,I am configuring switch as vtp client but after some time it is going to vtp transparent mode.Switch Model: 2950IOS version: 12.1I tried with vtp mode server option also. But same thing happened.I am seeing log message like " vlan database manager...

Can anyone tell me what the above is ?

Hi all, Am I right in saying routers doint flood broadcasts, and why is this ?

Why would would a wireless PC send out 25,000 SMNP packets a second looking for a network printer, when the pc isn't even logged on. When this happens it kills all switches on the site! All lights flashing in sequence and the packets we capture are S...

Currently, my network is running on Rapid PVST+. I need to change it to PVST+ mode due to corporate compliance issues. Does anyone knows if there will be downtime changing from Rapid PVST to PVST?Should the change be from core to access layer or vice...

Hello, Recently I setup two ethernet connection between two sites, and trying to do the load-sharing by normal OSPF equal cost routing. I've setup a seperate environement successfully as I see two equal cost route for one destination but it seems th...

Hi all, just a question I'd like to have confirmed if possible.We are running Etherchannel between 2 6500's, and have a back-uprunning over it from one server to another as such:Switch 1 <-4 port etherchannel-> Switch 2Server 1 <- back-up traffic -> ...