Switching

Dear All, Can 2950-EMI perform traffic classification and shaping? Let's say I have some workstations attached on my 2950 and I want to perform traffic classification and shaping on the uplink based on the IP address of workstations. Thanks a lot. ma...

I have 1 site which is using Ws-G5484 plugged into WS-C3550-24SMI fiber connection which are connecting back to another WS-C2950C-24 switch.Can it work?It different connector.

Hi Solution Team,I have a network to setup where multiple devices involved.Here are the devices...PC>>L2>>L3>>PIX>>Router>>>Leased Line>>>Router>>>PIX>>>ServerI need to access the server from the PC.Here are the IP Details..Router Before Leased Line ...

Help Please,I am trying to role out a 1721 using 2 wic 1enet cards.I am using c1700-y-mz.123-1a.binThe wic0 appears to be ok but even before inserting a 1 enet into wic1 I get the following error message.%PQUICC_ETHER-1-LOSTCARR_1: Unit 1, lost carri...

I am having problems with a network connection being dropped on a device connected to a Catalyst 3524.The system is a harden CPU running Windows 98. The network adapter is a Realtek RTL8139(A/B/C/8130) PCI Fast Ethernet NIC.After a period of inactiv...

HI Support Team can some one tell me what is Native VLAN and how its diffrent to a simple VLAN..??? How to configure it I Need the Imediate response ???RegardsPawan RAjput

Hi all,I am new to this forum. The need to learn more about cisco has driven me to this forum. The topics are very helpful.As per the datasheet provided on Cisco site, 2621XM supportsNM- 1AIM- 1WIC - 2FE - 2Performace - 30 kpps.I would like to know t...

Hello,does anybody can tell me what is normal operating temperature of that card ?Or if someone have that module can paste sh env temp output ?I have few with outlet temperature around 50C which looks me too high...Thanks,Mladen

We have 3500 and 2950 series switches in a cascade stack. How many switches can we have in this stack? I guess the question is how many switches can we have in this type of configuration cascaded together?

RouterA#reloadProceed with reload? [confirm]System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)Copyright (c) 1999 by cisco Systems, Inc.%Error opening tftp://255.255.255.255/ciscortrSystem Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)Cop...

Hi Guys, This may seem like a stupid question, but what are the TP Transciever (that i receive with all my Routers) used for? I assume they are used for Connecting to the AUI Ethernet Ports on my Routers for uplinking... allowing me to use RJ45? IF s...

I believe there may be an incompatibility between the Cisco and the 3Com that’s causing these issues.When I ping from the 1711 I get the following whether or not we are in half duplex or full duplex or speed 10 or 100 mbps. Notice every third packet ...

Hi,How do you migrate from ATM to GE running a parallel backbone, from ELAN TO VLANS ?The ATM switches are Madge switches and the GE switches are 6509s. Any help is much appreciated.Thanks,Paul

I have a 2514 router that i'm trying to set up at home. I also have a Catalyst 1900 switch. The problem i'm running into is with my ios i believe. I don't have 12.0 on my router so i can't use dhcp on my e0 transceiver to automatically obtain from Co...