Activity in Technology and Support
Cisco AnyConnect Connctvity Issue
Hi Guys,I am currently in the process of migrating the AnyConnect VPN from SSL to IPSec (IKEv2). During the transition period, I have allowed both SSL and IKEv2, and updated the AnyConnect XML profile to use IPSec as the primary protocol. All require...
Onboard Catalyst C9350 in Cisco Meraki
Dear CommunityWhere can I find a step-by-step guide how a Catalyst C9350 (Model C9350-48P) can be onboarded in Cisco Meraki? Within the ordering process, there was no difference in the ordering number (same number, if it is used in a Cisco classic en...
APIC Storage Fault - F1529
We have a 3-node cluster with model of APIC-CLUSTER-L3 running Cisco ACI (version 5.2(7f)).We observed abnormal storage behaviors on two APIC nodes (Node 2 and Node 3):Node 2:data/log: ~47%firmware: ~33%logs: ~20%Storage usage dropped suddenly from ~...
Nexus Dashboard 4.2.1 Cluster BringUp Failed
Hello Community,I'm trying to install Nexus Dashboard 3 Node Cluster on ND-NODE-L4.I'm using version 4.2(1) (via nd-dk9.4.2.1.10.iso)The Cluster Bringup already failed with: The Setup is L2:All 3 Nodes are reachable over Mgmt- and Data-Network.Mgmt- ...
Site-to-Site IKEv2 IPSec VPN Implementation
Site-to-Site IKEv2 IPSec VPN Implementation Introduction IKEv2 Proposal IKEv2 Policy IKEv2 Keyring IKEv2 Profile Crypto MAP Verification Introduction IPSec VPNs would normally use ...
IPsec Redundancy Using HSRP
We have configured HSRP on the LAN side of the WAN router and are using BGP and IPsec on the WAN side.In this case, is redundancy required in the crypto map for the WAN-side interface?Since HSRP is not used on the WAN side, I believe it is not necess...
CoPP ACL
Hello everyone i want to make ACL for CoPP but i have a doubt witch have to make it.ip access-list extended ACL-CoPP-IPsecpermit udp any eq isakmp any eq isakmppermit udp any any eq non500-isakmppermit udp any eq non500-isakmp anyorip access-list ext...
Resolved! Dark mode bugs
I thought I'd start a thread about the various (often minor) dark mode bugs that still need sorting out. Please feel free to add any you find and hopefully we will get some developers reading this!
Resource Connector 2.0.99-2604291148
This Resource Connector software version contains certain updates:Re-enabled the Resource Connector IP Address Display in the dashboard, giving administrators direct visibility for faster troubleshooting and simplified connectivity management.OS Secu...
HyperFlex – Reduce required free space (1.86 TB) to resume operations?
I am currently working on a Cisco HyperFlex cluster and observing the following output from stcli cluster info:Cluster state: ONLINEHealth state: UNHEALTHYFree capacity: ~5.58 TBMinimum free capacity required to resume operation: 1.86 TBSpace reclaim...
cannot connect to vpn lab
im trying to connect to the vpn for the lab. Initially i was able to connect but eventually got disconnected. Now i'm trying to reconnect using the same credentials but i get the error login failed
Anyconnect VPN: VoIP
Has anyone tried VoIP using AnyConnect VPN within secure access? Since the ZTNA doesn't support voice traffic.
Announcement: GA Release of DLP Multi-Language OCR
Announcing General Availability of Multi-Language Optical Image Recognition (OCR) in Cisco Secure Access. This new capability extends our Data Loss Prevention engine to detect and inspect sensitive text embedded within images, screenshots, and scanne...
VLAN load balancing with Catalyst 9300 and Meraki MS130 using RSTP
Hello community,I am reviewing a Meraki Dashboard-managed switching design with two Catalyst 9300 switches at the distribution layer and several Meraki MS130 switches at the access layer.The customer requirement is to achieve VLAN-based load distribu...
Catalyst Center Always
I am trying to access Catalyst Center Always-On v2.3.3.6-20260418T17053467 , but authentication fails with username and password provided
| User | Helpful Count |
|---|---|
| 105 | |
| 80 | |
| 74 | |
| 70 | |
| 59 |
