TelePresence and Video Infrastructure

Hi GuysAfter many days banging my head against the wall I've manged to get a Panasonic NCP 500 and a Cisco 2811(running c2800nm-adventerprisek9-mz.151-1.T) and CCME 7.0.1.1 to call each other over H323.Now the call works both ways however I'm unable ...

Hi,We are currenty installing a TP 3200 but discovered that the power cord is not compatible to our country standard socket. The one that arrived is PWR-CORD10-NA. We are planning to use a 3rd party adapter for the wall socket but my biggest question...

does CISCO 2811 support Video conferencing (data + Voice) facility by using the module 2 port channelized T1/E1 and PRI HWICPlease advise.Thanks

I know this should belong in TCL script forum. But I just wanted to see if anyone has encountered this issue.I was able to play prompt to the incoming leg. Once the incoming leg is connected with outgoing leg, a timer is started. When the timer ends,...

Hello,Some of our users call in to a Staples conference call; however, when they try the PIN number is not recognized.  I found that the VOIP tone is not recognized by all teleconference centers, so the dialed numbers are not being recognized.  Is th...

Our VOIP system allows us to receive faxes on our directnumbers.  The question I have is how to create a separate fax dial-peer that would interfere with ournormal VOIP dial-peers.Here are our current dial-peers:dial-peer voice 200 voip translation-p...

No Enable video cababilities options on 6921 phone running on CUCM 7.1.3,Please let me know ho can I enable video capabilities on cisco 6921 phone

I have cisco router 2821  Version 12.4(13r)T, RELEASE SOFTWARE (fc1)) with one VIC-4FXS-DID.When I do voice call I get a busy tone! With show voice call sumary i saw that vpm state was FXSLS_PARK in all of four FXS states.In  reloading router and or ...

I have setup a dial-peer to connect my call. I was able to connect to the other end(outbound call). the problem I'm facing is that for some reason, the other end can't hear anything from me, but I can hear from the other end.Thanks.

Hello:I have a problem when I use data share in a videoconference. After I have started the H.239 media stream, the content takes a minute to appear and each time I show a new screen, I need a lot of time (until one minute) until the image is reconst...

Hello's,We have a UC500 that has been configured and working fine for a while.  It has one SSID running and it too has been working.Recently we added in a new MS Server and it took over DHCP for the LAN.  The old server is still in use, though DHCP h...

After finished the installation of CTS1300 that just ship to me.I try to login at Administration Login Screen with user: Admin and password: ciscoBut it's fail to login.Please help to give me the process of password recovery.

HiI am fairly new to wireless and need some clarification about Voice conferencing. We have Cisco call manager now my office want make a voice conferencing with other office .we are looking a conferencing device which should be wireless and getting I...

Hi Guys,I'm struggling to find the Voice Debug commands output explaination guide.I need to understand the debug outputs, which is very diffcult to understand , Can someone help me out to get this.Thanks,Oliver