TelePresence and Video Infrastructure

Hi Experts well i am totally new bie in Cisco World ...just hold the working experiecne of CCNA. and now at this level ... i have a question .. i have been told to work on multicasting feature ..not like this but we have got a third party video strea...

We have upgraded 2 systems to Cisco Unified Video Advantage 2.0.1.1 (cdp 2.0.1.0). They cannot initiate video calls between each other but have no problems with video calls to systems running the older version - VT advantage 1.0(2).any ideas?

any software that perform sip testing including voice quality and flood testing, that will great if its free ???cheersasim

Hi, I am having problem with CME 4.0, I have at cisco IP Phone 7960 and this receive call of the PSTN but the call only ring one times over the ip Phone, the user calling hear the ring back normal. can anyone helps? Thank you.

I currently have a provider in Houston giving me a PRI in our Houston office. I also have a Sprint T1 from that office to my office in Caglary (Canada). What I am trying to do is bring the Houston dial-tone to the Caglary office over the T1 ciruit....

Was anyone able to use third-party cameras with CUPC? Which models?

Cisco CRA Editor 3.5(3)In the script we are doing a " Get Reporting Statistics " step to get the agent state What resulting statistic values? "Ready" does not approach

i have a 7936 conference phone which continually reboots. We are using Call Manager 4.1(3). i have tried several different 7936 all of which do the same. Does anybody have any ideas as to where the problem is? We use the phones over 3 floors. Floor 1...

VTA 2.0.2CCM 4.1(3)sr3cMCU3515-12 with 5.0.58 running in SSCP mode.All works as expected upto 3 parties in both ad-hoc and meetme. When 4 parties involved works fine with meetme, but not with ad-hoc. The person initiating the conference only sees 2 p...

Using AS5350, ios version 12.3isdn sitch-type primary-net5 connected with 1 E1 line to PSTN.Trying to get debugging info, but when I try to do "debug isdn q931" it says Invalid input detectect at '^' marker and the marker is pointing to the letter "s...

Hi can anyone help with any config example of syslog for cdr, I need seem call done for ip phone of ccme 4.0Thanks very much

we have an survailence camera system enviroment based on Cisco ip/tv. Sending RTP+RTCP from Server to IP/TV Viewer clients. We want to implement a separate streaming decoder supporting RTP but not RTCP. Is it possible to implement that without sendin...

I have a problem connecting a PBX on a 2800 with vic-2bri-nt/te where the isdn card must be NT. I focused the problem on the tei assignment. The PBX is expecting tei from thr 2800 but it does not supply. I changed the PBX with an ISDN telephone and t...

Newbie here looking for some basic advice on moving from a TDM PBX to a Cisco VoIP system. What are the basic Cisco building blocks to serve VoIP and PSTN calls? We don't have anyhing fancy like ACDs, just a PBX with some hunt groups and DDIs.Thanks,...

Hi, I have 2 CCM cluster linked together with a intracluster trunk (H323), Each site user VTA. It'it possible to use VTA over the intracluster trunk ?Do I have to change my h323 trunk for a SIP trunk ?Thanks !