TelePresence and Video Infrastructure

Hi Guys My new Cisco Spark Board 70, out of the box, started downloading new software (around 10 minutes) then it got stuck on "installing New software" for almost 3 hours... forced restart and then the whole process repeated again. How long does it ...

Hi community, Thank you for helping me with my last question.Today, I had an important meeting coming up, and my DX80 wasn't automatically pairing the endpoint like it was previously. I tried to look up a few tips on how to fix it, but I was able to ...

Hello Guys  I have the following amount of licenses for expressway C and E but I don't know exactly how many I have to add for each one 4  LIC-SW-EXP-K91  LIC-EXP-E-PAK2  LIC-EXP-ROOM         FOR EXP-E2  LIC-EXP-E                 FOR EXP-E2  LIC-EXP-...

Hi All, We are looking to establish SIP calling between our existing endpoints.We are looking to achieve this with our existing setup with minimal cost. The SIP dialing methods we are trying to achieve is: 1) IP dialing2) URL dialing3) e.164 (short d...

Hello Team,I have issue , CUCM register EPs are not able to Call WebEx.EP>>CUCM>>Exp C >>Exp E >> Web ExWhen we check Exp E search history we see "Request Timeout". In Wireshark we see Exp E ( LAN 2 IP ) re transmission TCP pack packets to WebEx Publ...

Hi all,we are currently using Mediasense for VOH, content in video conferences and VBrick live streams. Since Mediasense is EOL and lacks some other features I would like to know if someone knows an replacement. I need no recording. The nice thing ha...

Hi All, I have have 3 different clusters with video endpoints (mostly webex room series) and have a requirement that the directory for the endpoints have the list of all other video endpoints in our environment.  I have tried TMS but that solutions i...

Hi, I wanted to configure streaming on our CMS.The manuals are mentioning a second CMS server as the streamer.Is this a 'must be' or can I just configure the CMS server to send the rtmp stream to a server, that listens to it? thanks in advance

Hello,  I am looking for logs of devices/endpoints life cycle in the cucm as of when the first time the MAC address was added or first registered into cucm.We are on 12.0 CUCM. Thanks

Hi Everyone, We have a Webex Roomkit on-premise deployment with CUCM 11.5.X, We need to Disable to Network port and USB ports of the Video Devices, is this possible? I know with some phone models we can disable PC Port and USB like 88XX, but I cannot...

Room kit pro Line Audio Configuration Missing - since all audio inputs are now grouped into the 8 mic inputs, have we now lost the ability to have a dedicated Line input outside of the mic mute group? Example  on SX80/C40 - We run ceiling mics into M...

I am running CMM 2.7 and CMS 2.9. All was working well and then suddenly I received a message in CMM stating the CMS cluster is out of compliance. I do not own any PMP licenses (I own several SMPs)  but the CMM is stating 1 PMP is required?Why would ...