TelePresence and Video Infrastructure

Can the meetings button show on the touch 10 when in-call?

Does CMS has ability to limit retires if wrong username or meeting ID is entered ? Can we configure it.

Hello  I adding new Device package 11.5 to CUCM, just need know how to upgrading the DX650 to latest version.the current Android version is: 4.0.4 and Active load is: sipdx650. 10-0-2-24also i enable the enhanced feature but still the Google Store no...

My higher ed customer currently uses TMS to schedule lecture capture for their classes. They use TPS as the bridge and TCS as the recording server. With this infrastructure they can schedule a class and have the recording tied tied to specific instru...

We have been using conductor for making multiparty meeting room.And I'd created the template for password in order to establishing security.As a result, all participiants and devices will be able to type password when joining.But one site couldn't jo...

Cisco SX-80 keeps reverting back to old IP addresses after restart.Does anyone know the setting to get it to stop reverting back to old IP addresses?

We have a number of C20's and SX20's which some have a PC connected to the DVI external input (with audio) for content sharing.  The Rubbermaid carts these are on have a dedicated speaker for the PC and one for the codec.  I recently noticed we had a...

So we have a webex room kit pro + 3 monitors and all 3 monitors are recognized but when i dial into an IX5000, only the middle camera from the far end shows up on a single monitor locally. How do i get all 3 cameras to span across all three monitors ...

 Network [1] IPv4 Assignment: StaticIP Address, GW & Subnet Mask AssignedDX80 IPv4 Address is what it takes from Wi-Fi DHCPI have tried this at a customer site multiple times even used a mobile hot spot, tried firmware downgrade, CLI Commands for IP ...

Haven't herd from anyone on my last discussion about ce9.8.x.   Just thought I would start another one to see. Keep getting following issues when upgrading to ce9.8.1- No camera detected (I wait over 30 minutes to see if it's upgrading the camera sof...

I connected the Lumens camera to camera control port CTS-SX20N-K9 through split cable. In documentation said that SX20 control it's camera by VISCA protocol. And it's true but there is one trouble - recalling saved presets.I can move the camera in pa...

Hi, Please help me, how to recovery the cts codec pri g2 admin password.I tried this: SSH into the codec from your laptop.Step 2 Login with the following:• Username: pwrecovery• Password: pwresetThe following message appears in the SSH client window:...