TelePresence and Video Infrastructure

Does anyone have any experience with how well the CMS webrtc app performs in a meeting when you have a single low bandwidth site in the meeting, like 128 - 192 kbps?I'm just trying to set some customer expectations.  They've a single site with very p...

Hello.In TMS Administrative Tools --> Configuration --> Provisioning Extension Settings, in the section "LDAP Field Mappings for Import of New Users", is it possible to map a tmspe-db field with two ldap fields (or with a mask to choose between two f...

Hi,We are having Cisco DX80 CE 9.5.2 and CUCM 10.5.2.Need to register the DX80 using MRA.Configured below. CUCM1. Configured in CUCM.2. Associated the End UserDX80:LoginName: <UserID>Mode: EdgePassword: <Password>Domain: <yourdomain.com>Protocol: HTT...

Hello.We have these strange messages in syslog:05:01:46 cms.local postgres[84994]: [2-1] LOG: could not send data to client: Broken pipe 05:01:46 cms.local postgres[84994]: [3-1] FATAL: connection to client lost 05:01:47 cms.local postgres[84998]...

Hello, We plan to offer/quote a Room Kit Pro with Precision 60 camera to a client. Would we still be able to use PresenterTrack with only 1x camera (Precision 60) attached to the Codec Pro?

Hello, we have a requirement for a fixed volume output from a Cisco Room Kit plus system for hearing augmentation and a variable feed to room's ceiling speakers. The volume is controlled from the Cisco Touch 10.The analog output shall be used for the...

Hi,My question today is for the different version of roomkits, room kit pro, room kit plus and MX700.  Each of these have dual monitors.  These devices are all registered to webex portal hub.  Currently during a webex, the first monitor displays the ...

Hello, I have just built three Spark Room 55 units for testing and now need to remove them from their stands for shipment to install locations. I am unable to remove the screen from the floor base as shown on 18 of the install guide.   Is there some ...

Hi guys and girls,I've just powered on my Room Kit Plus (I turned it off for a few weeks but it was working fine before) and the message popped up that it cannot connect to some cloud services. The device is configured in the Cisco Webex Control Hub ...

Hello, is there way to have control on below request for codec device:1- hide the Forced Authorization Code once you dial since the codec locate on meeting room.2- disable/enable call as Rich Media Sessions "B2B call" from codec.