Hello,We have a client that want to go from on premise solution to webex with his Cisco SX80 Codec.We allready control the codec with RS232 with an Extron controler.My question is : Is there a command sent to the controler when a participant join the...
Forum Posts
We have a Cisco Webex Codec Plus and we go through a CVI Pexip to connect to Microsoft Teams.During Teams meetings including several external speakers and the Cisco room. People connect automatically with the microphone closed (mute). The main presen...
Call are going fine from tc 7 sx2o to sip calls but the device which I have upgraded to ce9 sip calls are not going through.
Resolved! SX20 SIP Calling Rejected
Good morning, I've recently upgraded an SX20 from TC7.3.6 to CE8.3.4 and am trying to migrate from H323 to SIP-only dialing. I have it pointed to our registrar, which is a VCS, and I get no errors on the diagnostics page. However, when I attempt to p...
Hi,We are using CUCM 14.0, CMS 3.1.3, Expressway 12.0 and multiple Webex Room series endpoints.All servers are placed in centralized location known as DC and endpoints are in multiple locations known as branches.All endpoints are natively registered ...
Got a DeskPro running RoomOS 10.19.4.2System is registered to our VCS Expressway Core. H323 enable works.We are working to go SIP only for all dialing from/to our VTC's and phones. What I am noticing now is I am able to dialing VTC to VTC that are ...
Resolved! Cannot Join Meeting on WebRTC CMS
Hi,Currently I'm having problem that user cannot join to room with error Joining Meeting Failed when joining from web browser. We use CMS 2.3 with CMS Turn. When user joining from Cisco Meeting App, they able to join room normally.I attached 2 logs c...
Resolved! CONFIG WEBAPP CMS 3.3
I am running CMS version 3.3 and trying to get WEBAPP working. One thing I noticed reading the Configurating WEB APP CISCO guide is last page when I need to WEB into the CMS. I go to Configuratio > General page. I don't have the "External Access" W...
Dear Team, Please provide your input for the below scenario. We have a customer, whose Webex domain says "ABC" and whose Microsoft domain says "def". If I configure Webex CVI, can I do the integration successfully. Also, I would like to know if is th...
Hi, need help to resolve frequent call drop issue I am facing in company's SX 80. During the drop, first the voice goes down, then video and then screen. Ultimately the presenter has to disconnect and connect the call.No packet drop in server end.
I'm looking at an older PHD-1080P4XS1 camera which supports HDMI output in 1080p and 720p resolutions. However, the camera does not have dip switches (unlike the 12x) and Cisco docs do not mention how to actually set the output format on these types ...
I'm trying to register a SX80 via the Webex Control Hub (admin.webex.com). (Add device, generate 16-digit activation code). However, when I go to enter the activation code I get the error 'The activation service requires an encryption option key'. ...
Hello,I was asked to resurrect a MX200 G2, which I thought would be straight forward. I upgraded the OS to ce 9.15.15.4 52ab5233aad 2022-09-13, grabbed the IP address and started the process to connecting it to Control Hub, as we are running Webex Ed...
Is the release key and option key information still available for the C series Codecs anywhere within Cisco ? Cisco may have retired them but they are good units and still in service... Thanks
please help me to resolve my problem ++++++++ We installed Webex Room Panorama for our customers. After installation, I made a one-to-one Call, and the layout was strange.During a Call, the other party's screen appeared only on the 1st monitor screen...
