Can anyone direct me to where I can find the published MTBF for the DX80? Thanks -
Forum Posts
Hello Everyone, I have been going back and forth with different integrators and none of them seem to really know what specific standards to go by on Displays for Video Conferencing such as refresh, NITS, IPS boards, etc. What they do know is what the...
I am working on a design for a video conferencing system using the Webex Codec Pro. I have three sources using the 3 HDMI content inputs and the 2 camera HDMI inputs are used by a Speaker Track 60 camera. I would like to use the SDI input of the Co...
I was going through the settings to re-configure and after i reset call services, it's been looping at the Cisco Boot Logo. Both the pinhole button on the back and the volume up + mute button trick don't appear to do anything. Any other suggestions?
Conditions:Due to hardware issues with the touch controller calibration causes the screen to be unresponsive and can cause phantom touches on the screen. The phantom touches is what is bugging me since it keeps bringing up the voice menu over and ove...
Hi all, I'm attempting to write a macro that retrieves the Microsoft Outlook Calendar for a user. i get the message 'Failed writing received data to disk/application' if I request a weeks worth of meeting data - The call works if I get a shorter du...
Hi All,Please help, We are facing an issues in Cisco sx10 device when try dial SIP bridge id like (5555@conferance.mumbai.com) the device getting hang no any option to continue whenever restart the device.We did all of configuration also upgrade the ...
Hi Team, We are planning to upgrade our Cisco TMS from 15.10 to 15.13. While running upgrade file it askes to enter credentials of existing SQL database user 'sa'. This password is not available. Can we reset this 'sa' password. If we reset 'sa' pass...
Hello! We have three "Cisco Webex Room Kit Plus" and one multisite option. The multisite option is installed on one device and active, but we can't talk in a conferenze. The Option to add someone to the conference is not there.Is there a how to oder ...
Hi, I do have a Cisco Room Kit registered on my CUCM and I would like to invite/add more than one device during the call. This action can be done over activating the multisite option or there is other prequisites needed ?
Hi,I have been migrating all my endpoints from CUCM to Cisco cloud and am seeing an issue with the SX series on RoomOS9.15.On a cloud registered SX20, connected to a Zoom meeting, any participant shares content, the incoming video is blacked out in t...
Hi guys, I have a Cisco Kit Pro with a Touchpad 10 connected directly to the codec, but the touchpad has refused to power up when connected to the codec, but if I plug it into a different PoE port on the switch, it powers up, This wasn't the case ini...
Resolved! Cisco Ip camera configuration
what is the basic configuration needed to install a cisco camera on a cisco 3850 switch. I guess I also need a display software to go with it. Please help. Thanks
Hello all,At client’s sites and at our office we have several codec's, Roomkit, Roomkit Plus, SX80, that is giving a Certificate Expiration issue. I read the admin guides and tried to find similar issues online and here in the Cisco Community but cou...
We have a Large Video Conferencing room which uses a Codec Pro and 2 Large Leds Boards side by side for Video Calls.Once screen is for local and remote content. And the other screen displays the users that are within the call.Layout Options are simpl...
