TelePresence and Video Infrastructure

Is there any way to set the clock and date on the SX20 when there is no possibility of connecting an NTP server? The system is in a closed area with no network connections available. I have seen where the ISDN Link time and date can be set, but it do...

I have a customer who is preparing a room for the installation of a MX-800 Single Screen Dual Camera System.  Customer will leverage the Floor stand secured to the wall mount option.   Customer is preparing the room and wants to reinforce the wall.  ...

Hello we have a CUCM cluster 10.5 that is running in insecure mode.  All of our Cisco endpoints registered to CUCM when calling externally through the VCS control which connects to an VCS E in the cloud the calls are not encrypted.  Our Polycom endpo...

Hi, I have a requirement where I have to connect the Polycom HDX ceiling microphone to Cisco SX80.  To make the connection, I need a converter to convert RJ45 to Euroblock to connect it to SX80.  Will it work directly.  Has some one tried it before. ...

Hello all, has somebody already successful deployed a CMS "Single Split Server Deployment", where the Core and Edge Module is on the same CMS Instance, just with two different IP interfaces (Internal / DMZ) - each interface mapped to one dedicated U...

HelloI am a TAC engineer in the Telepresence team in RTP.  I am looking for Cisco Partners interested in Troubleshooting training (CUCM and TP).If you are a partner located in the East Coast, USA, please PRIVATE message me on the forum.Thanks

Hi i have a sx80 configured as h323  this is the configuration used for video calls over IP h323 network service ==== activated h323 call setup mode ===== direct public ip adress assigned to network interface of sx80 with this configuration a can mak...

I need the camera (CTS-PHD1080P4XS1= or CTS-PHD1080P12XS  ) for Cisco TelePresence Quick Set C20 (CTS-QSC20-K9). But those camera are End of Sale. So which camera will replacement or compatible for Cisco TelePresence Quick Set C20 (CTS-QSC20-K9)? Not...

In Single-Split Deployment, TURN server and Webbridge server are co-located on Edge server. By default, they both listen to same port 443. In the document, it says either use two interfaces or change the port TURN server listens to, i.e. 447. In my D...

TMS version: 14.4TMSXE Version: 4.0Exchange 2010 SP2Note that we had the same issues in previous versions.Since we put the TMS-Exchange synchronization in place we the TMSXE. We keep on facing multiple issues.One of them is that TMS/TMSXE often compl...