Hi.We have installed Cisco Web Security Appliance S695 version 14.5.0-537 as http proxy server with LDAP authentication.If we configure a videoconference SX20 version CE9.15.15.4 with manual proxy as showed in the following screenshot, the authentica...
Hi, I have a functioned SX80 that was recently installed but under the system diagnostics page i'm seeing 'Warning: HTTP feedback. The HTTP feedback for slot 3 can not be delivered. There might be a problem with the connectivity to the remote server"...
I am trying to write a CPL script to change the source URI for outgoing video calls originating from Call Manager. We are running Expressway 14.0.8. I also looked at some older posts, and those examples didn't seem to work either, and I am not for ...
Currently when plugging in the device, the screen with the touchpad shows the Maintenance mode error like the picture I sent. Processed steps: - Factory reset - Tried updating new FW for device.
Hello,when enabled, is the noise removal feature active on all mic inputs regardless of the echo cancelling or the noise suppression setting on the input itself?thank you
Hi, SX-20 is used with Zoom and dual monitors are there. When shared to SX-20 from internally we can see the video on one screen and presentation on second screen. (Preference set in that way). When dialled from the internet (Internet - NAT- SX20) an...
Hi, I saw a difference in operation with ZOOM between ce10_15_4_1.k3.cop,ce10_19_3_0.k3.cop firmware and ce 9.15.3.26 19885f27907 2022-01-30. With the new software versions in ZOOM conference, the far has video and audio but ...
Hello everyone, I just wanted to validate this design:- 1x Desk Pro with Telepresence Room license at a reception area- 3x 8845 IP Phones with UCL licenses for the agents connected to UCCX- LAN connection within the same buildingThe agents will handl...
I have Tandberg C20 with TC4 firmware.without knowing that when upgrading to TC5, i would require release key to be installed also.my device is without contract, please advise how should i proceeed ? 1. Downgrade back to TC4 ? 2. Contact licensing T...
do you have to use CVI with VTC integration in order to use the ms teams macro on the touch panel....i know you dont have to for zoom macro because zoom dials the crc every time
i have an issue where the macro buttons that were created to call out to MS Team and Zoom are no longer. Attached is the error that displays. I have tried new software loads and reverting back but nothing is seemingly making difference,
Hey,I am very new to the Cisco world and I have just inherited 2 Cisco boards listed above. The controllers for these are either missing or not functioning. The reset for the Mx300 is not working. Is there a way to completely remove the software that...
Hi Team,Is there any device or option to add more MICs in Cisco Spark Room Kit-K9. I want to add 6-8 MIC apart from the two which are by default conneted. Please help on this?
https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/microphone/installation_guide/ceiling-microphone-installation-guide.pdfWe currently have four of these ceiling microphones installed in a conference room, but the codec has been decommis...
Hello,Can anyone help to let me know which is the base of WebEx ROOMOS
