TelePresence and Video Infrastructure

Hi ExpertsI need your suggestion on below requirementOne of our customer using cisco Telepresence infra setup (VCSc&E, Conductor, TIP Server & TMS, CUCM). CUCM and VCS integrated, Recently we installed  ISDN the GW (3241)Now customer wants to block t...

Hellomy company has one vcs test server.  and we buy new server. I need to move vcs to new server.   I backup and deploy using vmware ovf file.deploy success. but new server vcs show license error.how to move vcs license?          

Hello Everybody,I usually use CUVA ( Cisco Unified Video Advantage), the thing is  that it just Permit 1 video call between 2 users.I want to know witch tools or witch application can i use in CUCM for have a kind of meet me video conference with alm...

Hi all,is it possible to replace the 7975 phone with another phone version ? i tried it use 7945 but it show ip phone doesn't detected in cts-1300 status, but in CM the 7945 has registered status, also i use Jabber windows to call the CTS but i canno...

I know that on the C series codecs you are entitled to the software updates within the whole number release you are at. Is that the same on the old MXP line?I have a customer with a problematic MXP 3000. You can't buy a service contract for it becaus...

HI, We have added the Telepresence Profile 55 Endpoint in CUCM 9.X. The endpoint is not registering to CUCM inspite of all the correct  configuraiton Is teleprsence room license mandatory for Profile Series 55 endpoint to register in CUCM 9.1. Krishn...

Hi thereWe are installing a C60 codec using a DVI splitter in input 3 for Presentation source (DVI-I Male to DVI-D & VGA Female Splitter Y Cable Adapter)The DVI input source is configured as Auto-Detect.  The Admin Guide confirms this seting will aut...

Hi, would like to know if mx300/mx200 can have an embedded multisite option just like the usual cts tp or it will just connect to an external mcu?Also, will it work on h323 as stand alone or it really needs a ucm or vcs?By the way, what codec was use...

Hello,Is it possible to control the incoming call to a VCS Expressway from a known IP address? I know I can block auth/un-auth traffic as well as source alias, but I want to allow incoming calls from only a specific gatekeeper(s).Is this possible? I ...